Structural Materials |
Influence of AZ31 magnesium alloy sheet compressed along various paths on mechanical properties |
SONG Guang-sheng, JIANG Jing-qian, XU Yong, ZHANG Shi-hong |
2469 |
Effect of ultrasonic impact on surface microstructures and mechanical properties of MB8 magnesium alloy welded joint |
WEI Kang, HE Bo-lin, YU Ying-xia |
2479 |
Effect of strain rate on compressive deformation behaviors and mechanical properties of lotus-type porous magnesium in direction vertical to pores |
LIU Xin-hua, YAN Yu-ping, XIE Jian-xin |
2488 |
Preparation of large-volume semi-solid slurry of Al-Zn-Mg-Cu aluminum alloy by weak electromagnetic stirring |
ZHAO Jun-wen, GUO An, XU Chao, LI Wei, DAI Guang-ze, WU Shu-sen |
2499 |
Effect of equal-channel angular pressing on Si particles morphology and mechanical properties of Al-Si alloys |
ZHENG Yu-xi, MA Ai-bin, JIANG Jing-hua, SONG Dan |
2506 |
Preparation of AlB12-type Al-B master alloys by high temperature treatment of melts |
WANG Qing-liang, SHEN Li, ZHAO Jiu-zhou, ZHANG Xing-zhong |
2516 |
Low-temperature retrogression of spray formed 7075 alloy |
SU Rui-ming, QU Ying-dong, LI Xiang, YOU Jun-hua, LI Rong-de |
2523 |
Effect of TiB2 on microstructure, mechanical properties and oxidation resistance of TiAl-based alloys |
XIAO Shu-long, JING Ke, XU Li-juan, CHEN Yu-yong |
2530 |
Microstructure evolution of semi-solid copper alloy billet during uniaxial compression |
XIAO Han, CHEN Ze-bang, LI Yong, LU De-hong, ZHOU Rong-feng, ZHOU Rong |
2537 |
First-principles calculations of electronic structure and mechanical properties of Ti-Ni intermetallic compounds |
WANG Peng, LI Jun,LIN Chong-zhi, YANG Liu, PENG Lin, WANG Ying, XIAO Chong, CHEN Jing-chao |
2546 |
Functional Materials |
Fatigue property of laser welded joints of Hastelloy C-276 thin sheet |
LIU Shuai, WU Dong-dong, CHAI Dong-sheng, ZHOU Si-yu, MA Guang-yi, ZHOU Ping, WU Dong-jiang |
2555 |
Effect of bias on structure and properties of AlTiN coating deposited on high-speed steel |
NIU Rui-li, LI Jin-long, LIU Shuan, WANG Yong-xin, SHI Wen, CHEN Jian-min |
2564 |
Effect on interface and property of Sn2.5Ag0.7Cu0.1RExNi/Cu solder joints in severe thermal cycling |
GUO Xing-dong, ZHANG Ke-ke, QIU Ran-feng, SHI Hong-xin, WANG Yao-li, MA Ning |
2573 |
Effect of electrolyte on capacitive performance of Ti/RuO2-TiO2 electrodes |
CHEN Zhi-jie, ZHU Jun-qiu, SHAO Yan-qun, YI Zhao-yu, TANG Dian |
2580 |
Fabrication of nanopore arrays on Ti3SiC2 by anodic oxidation |
YIN Hong-feng, HE Chen, HOU Qin, YUAN Hu-die |
2589 |
Preparation and catalytic activity for cathodic oxygen reduction reaction in microbial fuel cell of MnO2@graphene composites |
WANG Ya-guang, HE Ze-qiang, LONG Qiu-ping, XIONG Li-zhi |
2596 |
Tribological property of Ti-N composite layer formed on QBe1.9 by plasma surface Ti-alloying and nitriding |
LIU Lin, SHEN Hang-hang, LIU Xiao-zhen, GUO Qi, MENG Tian-xu, WANG Zhen-xia, LIU Xiao-ping |
2605 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Geochronology, geochemical characteristics of intrusions in Beroen of Ecuador and their geology implications |
XI Zhen, LI Bin, GAO Guang-ming, GUO Xiao-dong |
2613 |
Ore-forming fluid characteristics and genesis of Baojinshan gold deposit in Shuangfeng County, Hunan Province, China |
JU Pei-jiao, LAI Jian-qing, MO Qing-yun, SHI Jian, TAN Hui-yue, TAO Shi-long |
2625 |
3D magnetic gradient tensor regularization inversion method based on smooth constrained |
LI Jin-peng, ZHANG Ying-tang, LI Zhi-ning, FAN Hong-bo, YIN Gang |
2640 |
Effect of polycarboxylate-based superplasticizer on performances of super fine tailings paste backfill |
RAO Yun-zhang, SHAO Ya-jian, XIAO Guang-zhe, SUN Xiang, HUANG Yong-gang |
2647 |
Novel process for tin recovery from stannous secondary resources based on membrane electrodeposition |
PENG Si-yao, YANG Jian-guang, CHEN Bing, LI Shu-chao, LEI Jie, LI Jun-yuan |
2656 |
Infiltration head of ion-absorbed rare earth with column leaching experiment determined based on Green-Ampt model |
YIN Sheng-hua, XIE Fang-fang |
2668 |
Technique, thermodynamics and kinetics of zinc removal from acidic wastewater via gas-liquid sulfidation reaction |
JIANG Guo-min, PENG Bin, CHAI Li-yuan, WANG Qing-wei, WANG Yun-yan, SHI Mei-qing |
2676 |
Thermal decomposition of lead citrate Pb3(C6H5O7)2·3H2O from recovery spent lead paste by hydrometallurgy process |
ZHU Xin-feng, WANG Xian-li, NIE Peng-ru,ZHANG Wei,HU Yu-chen, YANG Jia-kuan, WANG Xiao, GUO Yi-fei |
2686 |