| Structural Materials |
| Primary-transient creep and anelastic backflow of pure copper deformed at low temperatures and ultra-low strain rates |
Jun-jie SHEN, Ken-ichi IKEDA, Satoshi HATA, Hideharu NAKASHIMA |
1729 |
| Effect of processing route on grain refinement in pure copper processed by equal channel angular extrusion |
Chao-lan TANG, Hao LI, Sai-yi LI |
1736 |
| Microstructural characterization and dry sliding wear behavior of spark plasma sintered Cu-YSZ composites |
Jafar MIRAZIMI, Parvin ABACHI, Kazem PURAZRANG |
1745 |
| Microstructure and dry sliding wear behavior of Cu-Sn alloy reinforced with multiwalled carbon nanotubes |
H. M. MALLIKARJUNA, K. T. KASHYAP, P. G. KOPPAD, C. S. RAMESH, R. KESHAVAMURTHY |
1755 |
| Tensile deformation behaviors of pure nickel fine wire with a few grains across diameter |
Chuan-jie WANG, Chun-ju WANG, Jie XU, Peng ZHANG, De-bin SHAN, Bin GUO, Zhen-long WANG |
1765 |
| Effects of Si addition on microstructure, mechanical and thermal fatigue properties of Zn-38Al-2.5Cu alloys |
Ting LIU, Nai-chao SI, Guang-lei LIU, Rui ZHANG, Chang-yang QI |
1775 |
| Effects of grain refinement and residual elements on hot tearing of A713 aluminium cast alloy |
Anil Kumar BIRRU, D. BENNY KARUNAKAR |
1783 |
| Microstructure and mechanical properties characterization of AA6061/TiC aluminum matrix composites synthesized by in situ reaction of silicon carbide and potassium fluotitanate |
K. JESHURUN LIJAY, J. DAVID RAJA SELVAM, I. DINAHARAN, S. J. VIJAY |
1791 |
| Effect of SiC content on dry sliding wear, corrosion and corrosive wear of Al/SiC nanocomposites |
Sareh MOSLEH-SHIRAZI, Farshad AKHLAGHI, Dong-yang LI |
1801 |
| Effects of sliding velocity and normal load on tribological behavior of aged Al-Sn-Cu alloy |
Sheng-cheng ZHANG, Qing-lin PAN, Jie YAN, Xing HUANG |
1809 |
| Preparation of semi-solid ZL101 aluminum alloy slurry by serpentine channel |
Shu-jian CHENG, Yu-hong ZHAO, Hua HOU, Yu-chun JIN, Xiao-xiao GUO |
1820 |
| Effects of ultrasonic treatment on microstructure and mechanical properties of Mg-6Zn-0.5Y-2Sn alloy |
Han-song XUE, Zhi-hui XING, Wei-na ZHANG, Gang YANG, Fu-sheng PAN |
1826 |
| Microstructure evolution and mechanical properties of Mg-7Gd-3Y-1Nd-1Zn-0.5Zr alloy |
Meng LI, Kui ZHANG, Zhi-wei DU, Xing-gang LI, Ming-long MA |
1835 |
| Diffusion bonding of Al 7075 and Mg AZ31 alloys: Process parameters, microstructural analysis and mechanical properties |
Seyyed Salman SEYYED AFGHAHI, Mojtaba JAFARIAN, Moslem PAIDAR, Morteza JAFARIAN |
1843 |
| Evolving properties of friction stir spot welds between AA1060 and commercially pure copper C11000 |
Mukuna P. MUBIAYI, Esther T. AKINLABI |
1852 |
| Interaction among deformation, recrystallization and phase transformation of TA2 pure titanium during hot compression |
Kai LI, Ping YANG |
1863 |
| Effect of solid carburization on surface microstructure and hardness of Ti-6Al-4V alloy and (TiB+La2O3)/Ti-6Al-4V composite |
Hong-qiang DUAN, Yuan-fei HAN, Wei-jie Lü, Jian-wei MAO, Li-qiang WANG, Di ZHANG |
1871 |
| Microstructure and evolution of (TiB2+Al2O3)/NiAl composites prepared by self-propagation high-temperature synthesis |
Xiao-jie SONG, Hong-zhi CUI, Li-li CAO, P. Y. GULYAEV |
1878 |
| Relationship between microstructure and mechanical properties of undercooled K4169 superalloy |
Ke-ren ZHANG, Fa-qin XIE, Rui HU, Xiang-qing WU |
1885 |
| Friction and wear behaviors of Nb-Ti-Si-Cr based ultrahigh temperature alloy and its Zr-Y jointly modified silicide coatings |
Xuan LI, Xi-ping GUO, Yan-qiang QIAO |
1892 |
| Identification of processing window for extrusion of large thick-walled Inconel 625 alloy pipes using response surface methodology |
Liang-gang Guo, Li Dang, He Yang, Jun Zhang, Wen-da Zheng |
1902 |
| Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
| Static and dynamic tensile failure characteristics of rock based on splitting test of circular ring |
Di-yuan LI, Tao WANG, Teng-jiao CHENG, Xiao-lei SUN |
1912 |
| Strength characteristics of dry and saturated rock at different strain rates |
Zi-long ZHOU, Xin CAI, Yuan ZHAO, Lu CHEN, Cheng XIONG, Xi-bing LI |
1919 |
| Comparison of mechanical properties in high temperature and thermal treatment granite |
Tu-bing YIN, Rong-hua SHU, Xi-bing LI, Pin WANG, Xi-ling LIU |
1926 |
| Feasibility of stochastic gradient boosting approach for predicting rockburst damage in burst-prone mines |
Jian ZHOU, Xiu-zhi SHI, Ren-dong HUANG, Xian-yang QIU, Chong CHEN |
1938 |
| Stability of undercut space in fragment orebody based on key block theory |
Jian-hua HU, Chun YANG, Ke-ping ZHOU, Jie-lin LI, Feng GAO |
1946 |
| Reliability analysis of piles constructed on slopes under laterally loading |
Chong JIANG, Tian-bin LI, Ke-ping ZHOU, Zhao CHEN, Li CHEN, Zi-long ZHOU, Lin LIU, Ce SHA |
1955 |
| Application of Hilbert-Huang transform based delay time identification in optimization of short millisecond blasting |
Xiu-zhi SHI, Xian-yang QIU, Jian ZHOU, Xin CHEN, Yu-qian FAN, Er-wei LU |
1965 |
| Dynamic experiments on flocculation and sedimentation of argillized ultrafine tailings using fly-ash-based magnetic coagulant |
Shuai LI, Xin-min WANG, Qin-li ZHANG |
1975 |
| Integration system research and development for three-dimensional laser scanning information visualization in goaf |
Zhou-quan LUO, Jun-jie HUANG, Zhen-yan LUO, Wei WANG, Ya-guang QIN |
1985 |
| Prediction of rock burst classification using cloud model with entropy weight |
Ke-ping ZHOU, Yun LIN, Hong-wei DENG, Jie-lin LI, Chuan-ju LIU |
1995 |
