Structural Materials |
Crystal plasticity simulation on earing during deep drawing of AZ31 magnesium alloy |
TANG Wei-qin, LI Da-yong, PENG Ying-hong |
1933 |
Influencing factors and controlling methods of tension-compression asymmetry in magnesium alloys |
SONG Bo, XIN Ren-long, SUN Li-yun, CHEN Gang, LIU Qing |
1941 |
Influence of rolling parameters on texture and formability of rolled AZ31 magnesium alloys at room temperature |
YANG Hai-bo, HU Shui-ping |
1953 |
Effect of compound energy field cast-rolling on microstructure and properties of AZ61 magnesium alloy plate |
ZHANG Huan-huan, HUANG Yuan-chun, LIU Sheng-dan, LIU Yu, XIAO Zheng-bing, DU Zhi-yong |
1960 |
Numerical simulation of dynamic behavior of extruded AZ91D magnesium alloy based on SHPB experiment |
ZHOU Xia, ZHAO Chang-mei, LI Li, HUANG Hong-jun |
1968 |
High temperature tensile property and deformation mechanism of Mg-2Al alloy |
QIAO Jun, BIAN Fu-bo, HE Min |
1976 |
Secondary deformation behavior of AZ31 magnesium extruded sheet |
ZHANG Yi-wei, WEI Feng, LIU Yu-feng, DING Han-lin, LI Dian-kai, YANG Lei |
1984 |
Effect of thermal exposure on microstructure and mechanical properties of 7A12-T7352 forging |
ZANG Jin-xin, RU Ji-gang, YI Lin-na, LI Hui-qu, WANG Liang, LIU Ming, WU Xiu-liang |
1992 |
Effects of hot deformation parameters on lamellar microstructure evolution of Ti2AlNb based alloy |
LI Jun-jun, ZENG Wei-dong, XUE Chen |
1998 |
Review of bending short process for lightweight component |
LIU Zhi-wen, LI Luo-xing |
2003 |
High temperature oxidation behaviors of Mo(Si1-x,Alx)2 with different Al contents |
YAN Jian-hui, XU Jian-jian, LIU Long-fei, MAO Zheng-yu, WANG Yue-ming, XU Ning |
2013 |
Effects of Al and RE on microstructure and corrosion resistance of Zn-Al alloy coatings |
HE Zhi-rong, HE Ying, LIU Ji-tuo, XIE Kai |
2020 |
Preparation and application of novel Al-Ti-B-Sr composite master alloy wire |
LIAO Cheng-wei, CHEN Huan, LUO Cheng-zhi, CHEN Jian-chun, PAN Chun-xu |
2026 |
Microstructure and fracture behaviour of spray-deposited SiCp/Al-Fe-V-Si sheet as-rolled after wedge pressing |
HE Yi-qiang, HU Jan-bin, ZHANG Yi, CHEN Zhi-gang, FENG Li-chao, CHEN Zhen-hua |
2035 |
Influence of Ti addition on high temperature oxidation resistance of Nb-based alloys |
JIANG Hui-ren, NIU Li-ye, XI Wen-jun, MA Wen-shuai, ZHANG Liang |
2044 |
Effects of can design on tensile properties of typical powder metallurgy titanium alloys |
GUO Rui-peng, XU Lei, BAI Chun-guang, WU Jie, WANG Qing-jiang, YANG Rui |
2050 |
Dislocation density variation and mechanical properties of pure copper via equal channel angular pressing |
DING Yu-tian, LIU Bo, GUO Ting-biao, HU Yong, LI Hai-long, ZHAO Jun-yuan |
2057 |
Corrosion behavior of TLM alloy in simulated body fluid containing proteins |
HUANG Wei-jiu, LIU Cheng-long, YU Yong-mei, XIE Lin |
2065 |
Phase field crystal simulation of dislocation emission and annihilation at grain boundary |
GAO Ying-jun, LU Cheng-jian, LUO Zhi-rong, LIN Kui, HUANG Chuang-gao |
2073 |
Functional Materials |
Microstructure and properties of heat treatable medium strength aluminium alloy conductor material |
LIU Dong-yu, LI Wen-jie, GAO Qian, HOU Shi-xiang, HAN Yu, ZHU Zhi-xiang |
2083 |
PVP-assisted complex solvothermal synthesis of flower-like Bi2WO6 catalysts with high visible-light photocatalytic activity |
CHEN Yuan, YANG Jia-tian, WEI Qing-min, ZHOU Ke-qiao, LIU Guo-cong |
2090 |
Microstructures and wear properties of coating on Ti-7.5Nb-4Mo-2Sn alloy prepared by laser surface alloying of C-Si powders |
LAN Zhi-jun, ZHANG De-chuang, YANG Fei, LUO Zhi-chun, LIN Jian-guo |
2100 |
Luminescence properties of Sr2Al14O25:Eu2+,Dy3+ phosphors prepared by co-precipitation hydrothermal method |
DU Hong-li, WANG Li-ying, XU Jia-bin, CHEN Yan-wen, WU Li-ming, GUO Dong-cai |
2107 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Origin and evolution of ore-forming material of Hutouya polymetallic deposit |
LEI Yuan-bao, LAI Jian-qing, WANG Xiong-jun, SU Sheng-shun, WANG Shou-liang, TAO Shi-long |
2117 |
Difference between Na2SO4 and Na2CO3 on Al-Fe separation of high aluminum iron ores |
LIU Mu-dan, JIANG Tao, LI Guang-hui, LIU Yong, LIU Zhen-zhen |
2129 |
Complex leaching and kinetics of Baotou mixed rare earth concentrate |
ZHANG Xiao-wei, LI Mei, LIU Zhao-gang, HU Yan-hong, WANG Mi-tang, LIU Jia, YANG Jian-ping |
2137 |
Enrichment of nickel ions by ion-exchange adsorption from leaching solution of nickel-bearing laterite |
YANG Cheng-wu, LIAO Ya-long, PENG Zhi-qiang |
2145 |
Microwave assisted leaching of copper anode slime based on Taguchi methods |
MA Zhi-yuan, YANG Hong-ying, CHEN Guo-bao, Lü Yang, TONG Lin-lin |
2152 |
Reductive leaching and leaching kinetics of low-grade pyrolusite ores using oat straw as reductant |
MAN Rui-lin, CHANG Wei, WU Qi, XUE Jian-rong |
2158 |
Leaching of Au from refractory gold ore in thiourea-thiocyanate solutions and stability of lixiviants |
YANG Xi-yun, LIU Zheng-kun, GUO Kong-bin, XU Hui, SHI Xi-chang |
2164 |
Extraction technology of vanadium and chromium from vanadium slags in presence of activated carbon |
PAN Zi-wei, WANG Da-wei, DU Hao, CHEN Gang, ZHENG Shi-li, WANG Shao-na, ZHANG Yi |
2171 |
Comparative research on solid state decarburization kinetics of high-carbon ferrochrome powder by microwave heating and conventional heating |
LI Xiao-guang, CHEN Jin, HAO Jiu-jiu, HAN Pei-de, LIU Jin-ying |
2181 |
Simulation of magnetic field on tracked permanent magnetic separator based on ANSYS |
LU Dong-fang, WANG Yu-hua, HE Ping-bo, SUN Wei, HU Yue-hua |
2188 |