| Structural Materials |
| Dynamic recrystallization of Mg-8Gd-3Y-0.6Zr alloy during hot-compression |
ZHANG Xin-ming, ZHOU Nan, LI Li, TANG Chang-ping, DENG Yun-lai |
2067 |
Residual bond structure analysis of equilibrium phase diagram of Al-Si and Mg-Al alloys under pressure condition
|
MI Guang-bao, LI Pei-jie, HE Liang-ju |
2074 |
Effects of electromagnetic casting on as-cast microstructures and
solid solubility inside crystals of Al-Zn-Mg-Cu-Zr alloy |
WANG Shao-hua, YANG Shou-jie, FANG Can-feng, WANG Jian-zhao, DAI Sheng-long, ZHANG Xing-guo |
2083 |
| Influence of electromagnetic stirring on structure of A356 melt and its solidification behavior |
WANG Jing, LI Pei-jie, HE Liang-ju, MI Guang-bao, ZHONG Yue-xian |
2090 |
| Effects of solid-solution on microstructure and property of high strength spray deposited Al-Zn-Mg-Cu alloy modified by Ni |
LI Zhen-liang, Xie Jian-xin, CHEN Wei, ZHAI Jing, REN Hui-ping, WANG Yu-feng |
2099 |
Effects of angular oscillation on semi-solid microstructure of
A356 aluminum alloy |
GUO Hong-min, YANG Xiang-jie, LUO Xue-quan, CHENG Shang-xu, WANG Ming |
2106 |
| Welding process and joint properties of 2A12 aluminum alloy by laser-MIG hybrid welding |
YAN Jun, GAO Ming, ZENG Xiao-yan |
2112 |
| Precipitation of new cubic phase in Al-Li alloys and its mechanism |
WANG Dong-lin, LI Shi-chen, WANG Xiao-ning, ZHENG Zi-qiao |
2119 |
| Fracture mechanisms of hot isostatic pressed powder and as-cast Be-Al alloys under tensile tests at room temperature |
XU De-mei, LI Feng, WANG Zhan-hong, HE Li-jun, REN Yu-ping, PEI Wen-li, QIN Gao-wu |
2128 |
| Superplasticity of in-situ synthesized (TiB+TiC)/7715D titanium matrix composite |
LI Li, LÜ, Wei-jie, LU Jun-qiang, QIN Ji-ning, ZHANG Di, WANG Min-min, ZHU Feng, JI Bo |
2136 |
Fabrication of fine-grain tungsten heavy alloy and
its dynamic failure behavior |
FAN Jing-lian, GONG Xing, QI Mei-gui, LIU Tao, HUANG Bai-yun |
2143 |
Iron matrix composite reinforced by hybrid of
in-situ WC particles and tungsten wires |
NIU Li-bin, XU Yun-hua, WU Hong, PENG Jian-hong |
2149 |
| Microstructure and mechanical properties of SiC/MoSi2 nanocomposites |
PENG Ke, YI Mao-zhong, LIU Xun, RAN Li-ping, GE Yi-cheng, YANG Lin |
2155 |
Effect of compressive stress on oxidation behavior of
pure nickel at 800 ℃ in airv |
ZHOU Chang-hai, MA Hai-tao, WANG Lai |
2162 |
| Functional Materials |
Compression mechanical behavior of porous NiTi alloys exhibiting high linear superelasticity
|
ZHANG Yu-peng, ZHAO Si-yong, MA Xiao, ZHANG Xin-ping |
2167 |
| Cellular automata modeling of influence of second-phase particles on two-dimension grain growth in polycrystalline materials |
KE Chang-bo, ZHANG Xin-ping |
2173 |
| Effect of sintering temperature and time on electrochemical performance of Li4Ti5O12 |
FANG Jie, WANG Zhi-xing, LI Xin-hai, HU Wei, GUO Hua-jun, PENG Wen-jie, WU Ling |
2179 |
| Wetting kinetics of Sn-Pb eutectic solder on Cu and Cu-Sn intermetallics substrates |
WANG Hong-qin, D. P. Sekulic, ZHAO Hui, ZHANG Xin-ping |
2186 |
| Microstructure and properties of BCu80Ni5SnTi active filler metal for brazing cubic boron nitride |
WANG Yi, YIN Shi-qiang, LU Guang-lin, LI Shi-quan, QIU Xiao-ming |
2192 |
| Absorber performance of thermally sprayed nanometer β-SiC/LBS matrix microwave absorber coatings |
YUAN Xiao-jing, YANG Jun-hua, ZHA Bai-lin, HOU Gen-liang, JIANG Li, WANG Han-gong |
2198 |
| Influence of TiO2 films on wear performance of diamond |
LIU Xiao-pan, WAN Long, HU Wei-da, WANG Yang |
2204 |
| Effect of discontinuous micro-arc oxidation on structure and properties of fabricated coatings |
ZHANG Xin-meng, YANG Xue-qin, TIAN Xiu-bo, GONG Chun-zhi, YANG Shi-qin |
2210 |
| Nonlinear dynamics of metal rubber damper |
GAO Yong-yi, CHEN An-hua, GUO Yuan-jun |
2216 |
| Mine Engine |
| Effects of superheat and current density on electrolysis expansion performance of semi-graphitic cathode at low temperature |
LI Jie, FANG Zhao, LÜ, Xiao-jun, TIAN Zhong-liang, LAI Yan-qing, XU Jian |
2222 |
Cr(Ⅵ) remediation by Pannonibacter phragmitetus in
contaminated soils |
CHAI Li-yuan, XU You-ze, WANG Hai-ying, XIANG Ren-jun, YANG Zhi-hui, SU Chang-qing, WANG Bing |
2230 |
Effect of anions on growth and sulfur oxidation activity of
Acidithiobacillus ferrooxidans |
ZHANG Cheng-gui, ZHANG Qian, WANG Jing, ZHANG Rui-yong, HE Huan, XIA Jin-lan, QIU Guan-zhou |
2237 |
| Thermodynamics of reaction of alumina during sintering process of high-iron gibbsite-type bauxite |
ZHU Zhong-ping, JIANG Tao, LI Guang-hui, HUANG Zhu-cheng |
2243 |
