Two different phenomena and mechanisms of PdCl2-4 in some chemical reactions |
CHEN Jing |
327 |
Effects of cold deformation before and after intermediate annealing on specific capacitance of cathode foils of 3003 aluminum alloy |
ZHANG Xin-ming, JIAN Xiong |
334 |
Numerical simulation of temperature field in continuous casting of copper thin-slab |
LI Jin-shan, MEI Jin-na, CHEN Zhong-wei, HU Rui, KOU Hong-chao |
338 |
Effect of heat treatment on microstructure of
Ti-45Al-7Nb-0·15B-0·4W |
HUANG Jin-song, LIU Yong, HE Yue-hui, ZHANG Yong-hong,LIU Bin, REN Bing, HUANG Bai-yun |
344 |
Oxidation kinetics of in-situ synthesized TiC/Ti matrix composites at elevated temperature |
QIN Ye-xia, LÜ, Wei-jie, XU Dong, ZHANG Di |
352 |
Preparation and sintering behavior of nanosized pure SrCe0.95Y0.05O3-x powders |
MENG Bo, TAN Xiao-yao, YANG Nai-tao, ZHANG Bao-yan |
358 |
Effect of heat oxidation treatment on gas release behavior of TiH2 |
GAO Hong-wu, LIU Shi-kui, ZHAO Yan-bo,LIU Shun-hua, LI Chang-mao |
363 |
Influence of manganese and pre-heat treatment on microstructure and mechanical properties of Al-Si alloy |
ZHANG Lei, JIAO Wan-li, YU Hai-jun, YAO Guang-chun |
368 |
Wetting behavior of graphite by CuMnCr alloy in vacuum atmosphere |
MENG Wei-ru, XU Ke-wei, YANG Ji-jun, HE Lin |
374 |
Preparation and microstructural characterization of nanocrystalline Mg2Si intermetallic compound bulk |
XIONG Wei, QIN Xiao-ying, WANG Li |
380 |
Al2O3/NiCrAl composites and functional gradient materials fabricated by reactive hot pressing |
LI Jun-qin, GU Kun-ming, TANG Jiao-ning,XIE Sheng-hui, ZHUANG Ying-hong |
386 |
Quantum chemical DV-Xα study on electronic structure of hydrogen storage materials VHx(x=0, 1, 2) |
LI Rong, ZHOU Shang-qi, LIANG Guo-ming,LIU Shou-ping, CHEN Chang-guo |
391 |
Effect of high magnetic field on peritectic reaction in Bi-Mn alloys at 355℃ |
LI Xi, REN Zhong-ming, GAO Yun,DENG Kang, ZHUANG Yun-qian, XU Kuang-di |
397 |
Microstructure, phase structure and microhardness of as-cast Ti-Sc binary alloys |
LIU Hui-qun, YI Dan-qing, XIAO Lai-rong, WANG Bin,LU Bin, HUANG Dao-yuan, YANG Sheng, WEI Liu-ying |
404 |
Influence of Ca addition on microstructure and mechanical properties of in-situ Mg2Si/ZM5 magnesium matrix composite |
CHEN Xiao, FU Gao-sheng, QIAN Kuang-wu |
410 |
Influence of low frequency electromagnetic field on microstructures of semi-continuously cast high-strength Al alloy |
YAN Ying, ZHANG Cai-bei, CUI Jing-lei, CUI Jian-zhong |
415 |
Growth mechanism of tetrapod ZnO whiskers |
CHEN Yi-feng, TANG Mo-tang, YANG Sheng-hai |
423 |
Viscosity model parameters fitting of feedstock in MIM simulation and analysis |
JIANG Bing-yan, WANG Lin, XIE Lei, HUANG Bai-yun |
429 |
Preparation of ultra-fine particle-sized CeO2 powder and its UV absorbance |
ZHU Zhao-wu, LONG Zhi-qi, CUI Da-li,ZHANG Shun-li, ZHANG Guo-cheng |
435 |
Effect of high-temperature pre-precipitation on stress corrosion cracking of 7A52 alloy |
CHEN Kang-hua, HUANG Lan-ping, ZHENG Qiang, HU Hua-wen |
441 |
Friction and wear properties of carbon/carbon composites with different matrix carbon |
LI Jiang-hong, XIONG Xiang, GONG Qian-ming, HUANG Bai-yun |
446 |
Rapid prototyping process by neural network |
WANG Rong-ji, WANG Ling-ling, ZHAO Li-hua |
452 |
Effect of grain size and content of SiCp on tribology characterization of SiCp/Al composites |
GE Xiao-lan, XU Xiao-jing, CAI Lan, CHEN Kang-min, JU Zhi-lan |
458 |
Corrosion behavior of magnesium alloy in electroless nickel plating bath |
HU Bo-nian, CHEN Jue-ling, YU Gang,LIU Zheng, YE Li-yuan |
463 |
Cr and Cr-Mo coatings on titanium alloy surface prepared by ion-beam enhanced deposition |
TANG Chang-bin, LIU Dao-xin, ZHU Xiao-dong,TIAN Lin-hai, WEN Sheng-ping, ZONG Rui-lei |
471 |
Effects of Al3Ti4B master alloy on microstructure and properties of Mg-7Al-0.4Zn-0.2Mn alloys |
CHEN Jing-yang, GUAN Shao-kang, LIN Dun-wen,WANG Li-guo, LI Jian-guo |
478 |
Effect of anode change and metal height on flow field of metal pad in aluminum reduction cells |
QI Xi-quan, FENG Nai-xiang, CUI Jian-zhong |
485 |
Preparation of TiO2 porous film on surface of pure titanium and study on its crystalline phase |
WANG Wei, TAO Jie, ZHANG Wei-wei, TAO Hai-jun, WANG Ling |
490 |