Structural Materials |
Microstructure transformation of 2519A aluminium alloy impacted at high strain rates |
ZHANG Xin-ming, GAO Zhi-guo, CHEN Ming-an, LI Hui-jie, LIU Ying, LIU Bo |
1371 |
Surface morphology of TaC coating prepared by chemical vapor deposition and preferential growth mechanism of TaC grains |
CHEN Zhao-ke, XIONG Xiang, LI Guo-dong, XIAO Peng, ZHANG Hong-bo, WANG Ya-lei, HUANG Bai-yun |
1377 |
Densification and mechanical properties of spray deposited large scale heat-resistant aluminum alloy tubular preforms during wedge pressing |
CHEN Zhen-hua, CHEN Zhi-gang, CHEN Ding, HE Yi-qiang, CHEN Gang |
1383 |
Tribological behaviors of micro-arc oxidation film of LY12 in different aqueous |
DING Hong-yan,, DAI Zhen-dong, ZHOU Fei, SKUIRY S C |
1389 |
High temperature deformation behavior of TC4 titanium alloy and its flows stress model |
LUO Jiao, LI Miao-quan, LI Hong, YU Wei-xin |
1395 |
Microstructures of shot peened layer on TiB2/Al at elevated temperatures |
LUAN Wei-zhi, JIANG Chuan-hai, WANG Hao-wei, V. JI |
1402 |
Hot deformation behavior of TC11 alloy with thick lamellar microstructure in two phase field based on Murty criterion |
LI Xin,, LU Shi-qiang, WANG Ke-lu, DING Lin-hai, LI Zhen-xi, CAO Chun-xiao |
1407 |
Microstructure evolution and high temperature deforming behavior of hydrogenated Ti-6Al-4V alloy |
LI Xiao-hua, NIU Yong, HOU Hong-liang, LI Zhi-qiang |
1414 |
Microstructures of cold-sprayed Ni coating |
ZHANG Hua-bing, ZHANG Jun-bao, LIANG Yong-li, SONG Hong-wei |
1421 |
Strengthening effect and mechanism of laser surface melted AM50A magnesium alloy |
CHEN Ju-fang,, ZHANG Yong-kang, LI Ren-xing, QIN Hai-yong |
1426 |
Structures refinement of Al-Zn-Mg-Cu-Cr alloy thick plates |
LIN Gao-yong, YANG Wei, SUN Li-ping, PENG Da-shu |
1432 |
Influences of temperature and strain rate on deformation twinning of polycrystalline titanium |
HUANG Wen,,, WANG Yang,, LI Zi-ran,, XIA Yuan-ming , |
1440 |
HIP treatment of superalloy Rene88DT prepared by laser rapid forming |
ZHAO Xiao-ming, LIN Xin, CHEN Jing, HUANG Wei-dong |
1446 |
Effect of nano-SiO2 on tribological properties of Cu-based friction materials |
DU Jian-hua, LIU Gui-min, XIE Feng-kuan, LI Chao, HAN Wen-zheng |
1453 |
Influence of heat treatment on properties and dry sliding frictional wear characteristics of A356/SiCp composite |
JIN Yun-xue, LEE Jung-moo, KANG Suk-bong |
1458 |
Nonlinear heat transfer analysis of die during liquid-solid extruding composites considering preheating and its experimental verification |
QI Le-hua, ZHOU Ji-ming, WANG Yu-shan, SU Li-zheng |
1466 |
Functional Materials |
Effect of AC voltage on anodic film of AZ91D magnesium alloy |
WANG Xi-mei, ZHU Li-qun |
1472 |
Effect of impregnation by silicon oil on arc erosion resistance wear of resin-matrix contact strip against copper |
TU Chuan-jun, CHEN Zhen-hua, XIA Jin-tong, CHEN Ding, YAN Hong-ge |
1479 |
Influence factors of sound absorption properties of closed-cell aluminum foam |
YU Hai-jun, YAO Guang-chun, CHENG Yan, ZHU Lei, JIAN Xu-yu, WANG Zhong, CHU Ying, JIANG Li-jun |
1487 |
Preparation and spectrum characteristics of BaHfO3׃Ce nano-powder by co-precipitation |
LIU Jing. , MA Wei-min, WEN Lei, LI Xi-kun, SHEN Shi-fei, GUO Yi-fen |
1492 |
High velocity compaction of electrolytic copper powder |
WANG Jian-zhong, QU Xuan-hui, YIN Hai-qing, ZHOU Sheng-yu, YI Ming-jun |
1498 |
Low OH content germanate glass prepared by batch soaking process in CCl4 |
XIAO Zhuo-hao, CHEN Yuan-yuan, ZUO Cheng-gang, LU An-xian |
1504 |
Improved adhesion of electroless Ni-P coatings on sintered Nd-Fe-B magnets by pre-plating in ultrasonic field |
WU Yuan-lu, YING Hua-gen, LUO Wei, YAN Mi |
1512 |
Photoresponsive wettability of ZnO micro-nanostructure films |
LIU Chang-song, QIN You-pei, LI Zhi-wen, PU Pei-zhong, WANG Ling |
1517 |
Explanation based on electron theory for solid solution strengthening in copper alloy |
JIA Shu-guo, LIU Ping, ZHENG Mao-sheng, REN Feng-zhang, TIAN Bao-hong, ZHOU Gen-shu |
1522 |
Axial symmetry explosive compaction of W-Ti powders |
ZHANG Xiao-li,, WANG Jin-xiang, JIA Xian-zhen, SUN Qin-mi, LIU Jia-cong |
1527 |
Mine Engine |
Plane shear (ModeⅡ) fracture experiment analysis of brittle rock at high temperature |
XIE Hai-feng, RAO Qiu-hua, XIE Qiang, LI Zong-yu, WANG Zhi |
1534 |
Influence of imperfection number on acoustic emissions and elastic strain energy decrease of rock specimens with initially random imperfections |
WANG Xue-bin |
1541 |
Preparation of aluminum by disproportion of sub-fluoride in vacuum |
LI Qiu-xia,, CHEN Wei-liang, DAI Yong-nian |
1550 |
Preparation of Al-Li master alloys by molten salt electrolysis |
LI Ji-dong, ZHANG Ming-jie, ZHANG Ting-an, LI Dan, ZHANG Zhuo |
1555 |
Mechanism of homogeneous nucleation in supersaturated sodium aliminate solutions |
ZHANG Li-chuan, CHEN Qi-yuan, YIN Zhou-lan |
1560 |
Influences of surfactants on wettability and floating property of bronze powders |
FENG La-jun, XU Da-peng, LEI A-li |
1566 |