| Material Development and Alloy Design |
| X38CrMoV5 hot-work tool steel as tool material for thixoforging of steel: Numerical and experimental evaluation |
A. RASSILI, J. C. PIERRET, G. VANEETVELD, J. HALLEUX, G. WALMAG, J. LECOMTE-BECKERS |
713 |
| Application of semisolid process to Zr-based metallic glass matrix composites |
T. Tamura, A. Makaya, K. Miwa |
719 |
Commercial AM60 alloy for semisolid processing:
Effects of continuous rheoconversion process on microstructure |
XING Bo (邢博), LI Yuan-dong (李元东), MA Ying (马颖),HAO Yuan (郝远), D.APELIAN |
723 |
| Fabrication of AZ31 alloy wire by continuous semisolid extrusion process |
GUAN Ren-guo(管仁国), ZHAO Zhan-yong(赵占勇), SUN Xiao-ping(孙小平), HUANG Hong-qian(黄红乾), DAI Chun-guang(戴春光), ZHANG Qiu-sheng(张秋生) |
729 |
| Microstructure and Properties |
| In situ microtomography investigation of microstructural evolution in
Al-Cu alloys during holding in semi-solid state |
S. TERZI,L. SALVO, M. SUERY, A. DAHLE, E. BOLLER |
734 |
Microstructure evolution and thixoextrusion of
AZ91D magnesium alloy produced by SSTT |
CHENG Yuan-sheng(程远胜), CHEN Qiang(陈强), HUANG Zhe-qun(黄哲群), HUANG Shu-hai(黄树海) |
739 |
Microstructure of semi-solid ADC12 aluminum alloy adopting
new SIMA method |
WANG Zhen-yu(王振宇), JI Ze-sheng(吉泽升), SUN Li-xin(孙丽鑫), XU Hong-yu(许红雨) |
744 |
| Microstructure of AZ91D magnesium alloy semi-solid billets prepared by SIMA method from chips |
XU Hong-yu(许红雨), JI Ze-sheng(吉泽升), HU Mao-liang(胡茂良), WANG Zhen-yu(王振宇) |
749 |
| Microstructure and mechanical properties of rheo-diecasted A390 alloy |
ZHAO Jun-wen(赵君文), WU Shu-sen (吴树森) |
754 |
| Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy |
Lü Shu-lin(吕书林), WU Shu-sen (吴树森), ZHU Ze-ming(朱泽明), AN Ping(安萍),MAO You-wu(毛有武) |
758 |
| Microstructure and properties of rheo-diecast Al-20Si-2Cu-1Ni-0.4Mg alloy with direct ultrasonic vibration process |
WU Shu-sen (吴树森), ZHONG Gu (钟鼓), WAN Li (万里), AN Ping (安萍), MAO You-wu(毛有武) |
763 |
Microstructural evolution of Mg9AlZnY alloy with vibration in
lost foam casting during semi-solid isothermal heat treatment |
ZHAO Zhong(赵忠), FAN Zi-tian(樊自田), JIANG Wen-ming(蒋文明), DONG Xuan-pu(董选普) |
768 |
| Experimental studies and phase field modeling of microstructure evolution during solidification with electromagnetic stirring |
P. Gerald Tennyson, P. Kumar, H. Lakshmi, G. Phanikumar, P. Dutta |
774 |
| Microstructural characteristics of thixoforged A356 alloy in mushy state |
S. TAHAMTAN, A. FADAVI BOOSTANI |
781 |
Synthesis and characterization of 356-SiCp composites by
stir casting and compocasting methods |
S. AMIRKHANLOU, B. NIROUMAND |
788 |
Design of experiments for determination of influence of different
parameters on mechanical properties of semi-solid extruded parts |
V. POUVAFAR, S. A. SADOUGH, F. HOSSEINJ, M. R. RAHMANI |
794 |
| Mechanical properties of thixo-formed austempered ductile iron |
B. HEIDARIAN, M. NLILI-AHMADABADI, M. MORADI |
798 |
| Characterization on morphology evolution of primary phase in semisolid A356 under slightly electromagnetic stirring |
LIU Zheng (刘政), MAO Wei-min (毛卫民), LIU Xiao-mei (刘小梅) |
805 |
| Thixotropic compression deformation behavior of SiCp/AZ61 magnesium matrix composites |
YAN Hong (闫洪), WANG Jian-jin(王建金) |
811 |
| Microstructure evolution behavior of AlSi9Cu3 alloy during rheocasting |
GUO Hong-min(郭洪民), LIU Xu-bo(刘旭波), YANG Xiang-jie(杨湘杰), ZHANG Ai-sheng(章爱生), LIU Yong(刘勇) |
815 |
| In-situ observation of crystal detachment behavior in NH4Cl-H2O system from chilling metal surface with vibration |
ZHANG Ying(张莹), WANG Meng(王猛), DU Li-cheng(杜立成), LIN Xin(林鑫), HUANG Wei-dong(黄卫东) |
821 |
Morphological evolution of non-dendritic microstructure during
solidification under stirring |
LIN Xin(林鑫), TONG Lei-lei(统雷雷), ZHAO Li-ning(赵力宁), WANG Li-lin(王理林), WANG Meng(王猛), HUANG Wei-dong(黄卫东) |
826 |
| Semi-solid rheocasting of grain refined aluminum alloy 7075 |
U. A. CURLE, G. GOVENDER |
832 |
| Influence of surface liquid segregation on corrosion behavior of semi‑solid metal high pressure die cast aluminium alloys |
E. P. MASUKU , H. MÖ,LLER, U. A. CURLE, P. C. PISTORIUS, W. LI |
837 |
Influence of elevated Fe, Ni and Cr levels on tensile properties of
SSM-HPDC Al-Si-Mg alloy F357 |
H. Mö,LLER, W. E. STUMPF, P. C. PISTORIUS |
842 |
| Characterization of surface liquid segregation in SSM-HPDC aluminium alloys 7075, 2024, 6082 and A201 |
H. Mö,LLER, U. A. CURLE , E. P. MASUKU |
847 |
| Wear of semi-solid rheocast SiCp/Al metal matrix composites |
U. A. CURLE, L. IVANCHEV |
852 |
| Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process |
R. BURAPA, S. JANUDOM, T. CHUCHEEP, R. CANYOOK, J. WANNASIN |
857 |
| Microstructure and mechanical properties of rheo-diecasting AZ91D Mg alloy |
YANG Liu-qing(杨柳青), KANG Yong-lin(康永林), ZHANG Fan(张帆), XU Jun(徐骏) |
862 |
| Rheology, Modelling and Simulation |
Effect of high shear rate on solidification microstructure of
semisolid AZ91D alloy |
ZHU Guang-lei (朱光磊), XU Jun (徐骏), ZHANG Zhi-feng (张志峰), LIU Guo-jun(刘国钧),Z. Fan |
868 |
Effects of annular electromagnetic stirring processing parameters on
semi-solid slurry production |
CHEN Xing-run(陈兴润), ZHANG Zhi-feng(张志峰), XU Jun(徐骏) |
873 |
| Prediction of shear-related defect locations in semi-solid casting using numerical flow models |
F. PINEAU, G. D’AMOURS |
878 |
Rheological behavior of semi-solid Mg2Si/AM60
magnesium matrix composites at steady state |
HU Yong(胡勇), HE Bo-lin(何柏林), YAN Hong(闫洪) |
883 |
| Numerical simulation and experiment validation of
thixoforming angle frame of AZ61 magnesium alloy |
JIANG Ju-fu (姜巨福), WANG Ying (王迎), QU Jian-jun (曲建俊), DU Zhi-ming (杜之明), LUO Shou-jing (罗守靖) |
888 |
Investigation of semi-solid aluminum alloy filling-plastic
flowing in thixoforging |
DU Zhi-ming (杜之明), LIU Jun (柳君), CHEN Gang(陈刚), QIN Jin (秦晋), XIE Shui-sheng (谢水生) |
893 |
| Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope |
N. K. KUND, P. DUTTA |
898 |
| Rheological behavior, microstructure and hardness of A356 aluminum alloy in semisolid state using backward extrusion process |
S. A. SADOUGH, M. R. RAHMANI, V. POUYAFAR |
906 |
| Treatment of discontinuous interface in liquid-solid forming with extended finite element method |
ZHOU Ji-ming(周计明), QI Le-hua(齐乐华) |
911 |
| Characterization of thixoforming process of 100Cr6 steel |
K. P. SO&#,EK , A. RASSILI , J. C. PIERRET , G. VANEETVELD |
916 |
| Numerical simulation on thixo-co-extrusion of double-layer tube with A356/AZ91D |
WANG Kai-kun(王开坤), SUN Jian-lin (孙建林), MENG Hai-feng (孟海峰),DU Yan-mei (杜艳梅), WANG Xi (王晰) |
921 |
| Numerical simulation of a thixocasting process for
AISI420 stainless steel air-turbine blade |
DAO Van-luu(陶文琉), ZHAO Sheng-dun(赵升吨), ZHANG Qi(张琦) |
926 |
Simulation of semisolid diecasting process of
four-way valve of HPb59-1 alloy for air-conditioner |
YAN Guan-hai(闫观海), ZHAO Sheng-dun(赵升吨), SHA Zheng-hui(沙郑辉) |
931 |
| Process Development |
| Stability of steel thixoforming process |
J. C. PIERRET, A. RASSILI, G. VANEETVELD, J. LE, COMTE-BECKERS |
937 |
| Electro-pulse modification and reheating process for production of
thixotropic microstructure in AlSi7Mg alloy |
TIAN Wen-tong(田文彤), ZHANG Guang-an(张广安) |
943 |
| Suitability of lost cores in rheocasting process |
H. Michels, M. Bünck, A. Bührig-Polaczek |
948 |
| Metal flow and die wear in semi-solid forging of steel using coated dies |
L. KHIZHNYAKOVA, M. EWERING, G. HIRT, K. BOBZIN, N. BAGCIVAN |
954 |
| Induction reheating of A356.2 aluminum alloy and
thixocasting as automobile component |
H. LAKSHMI, M. C. VINAY KUMAR, RAGHUNATH, P. KUMAR, V. RAMANARAYANAN, K. S. S. MURTHY, P. DUTTA |
961 |
| Effects of casting factors of cooling slope on semisolid condition |
T. HAGA, R. NAKAMURA, R. TAGO, H. WATARI |
968 |
| Reverse design of microstructure and application effectiveness for semi-solid processing of aluminum alloy |
YANG Yi-tao(杨弋涛), YIN Xiang-lin(尹湘林), SUN Bao-liang(孙保良), ZHANG Heng-hua(张恒华), JIN Xiao-chun(金晓春), SHAO Guang-jie(邵 |
973 |
| Semi-solid gravity sand casting using gas induced semi-solid process |
T. CHUCHEEP, R. BURAPA, S. JANUDOM, S. WISUTMETHANGOON, J. WANNASIN |
981 |
| Preparation of SiCp/A356 electronic packaging materials and its thixo-forging |
WANG Kai-kun(王开坤), KANG Yong-lin(康永林), SONG Pu-guang(宋普光), XU Feng(徐峰), LI Xian-hui(黎先辉) |
988 |
| Industrial Applications & Others |
| Modified rheological processing technology and
its applications in iron and steels |
XING Shu-ming(邢书明), BAO Pei-wei(鲍培玮), LI Nan(李楠), YAO Shu-qing(姚淑卿) |
993 |
| Thixocasting combination spanners using stainless steel X39CrMo17 |
M. BÜ,NCK, E. SUBASIC, A. BÜ,HRIG-POLACZEK, K. JIANG, S. MÜ,NSTERMANN, J. M. SCHNEIDER, K. FICKERT, H. J |
998 |
| Thixoextrusion of A357 aluminium alloy |
A. FORN, G. VANEETVELD, J. C. PIERRET, S. MENARGUES, M. T. BAILE, M. CAMPILLO, A. RASSILI |
1005 |
| Research and development of gas induced semi-solid process for
industrial applications |
J. WANNASIN, S. JANUDOM, T. RATTANOCHAIKUL, R. CANYOOK, R. BURAPA, T. CHUCHEEP, S. THANABUMRUNGKUL |
1010 |
| Industrial development of gas induced semi-solid process |
S. THANABUMRUNGKUL, S. JANUDOM, R. BURAPA, P. DULYAPRAPHANT, J. WANNASIN |
1016 |
| AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming |
Y. BIROL, D. ISLER |
1022 |
SiC nanoparticles reinforced magnesium matrix composites fabricated by
ultrasonic method |
WANG Zhao-hui(王朝辉), WANG Xu-dong(王旭东), ZHAO Yu-xin(赵宇昕), DU Wen-bo(杜文博) |
1029 |
| Characteristics of 100Cr6 bearing steel after thixoforming process performed with prototype device |
&#,. ROGAL, J. DUTKIEWICZ, T. CZEPPE , J. BONARSKI, B. OLSZOWSKA-SOBIERAJ |
1033 |
Structure of miniature components from steel produced by
forming in semi-solid state |
b. Masek, D. Aisman, M. Behulova, H. Jirkova |
1037 |
| Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components |
Q. ZHU, S. P. MIDSON |
1042 |
| A review on steel thixoforming |
A. RASSILI, H. V. ATKINSON |
1048 |
