Structural Materials |
Dynamic property evaluation of aluminum alloy 2519A by split Hopkinson pressure bar |
ZHANG Xin-ming(张新明), LI Hui-jie(李惠杰), LI Hui-zhong(李慧中), GAO Hui(高慧), |
1 |
Finite element modeling of power spinning of thin-walled shell with hoop inner rib |
BAI Qian(白倩), YANG He(杨合), ZHAN Mei(詹梅) |
6 |
Strength distribution at interface of rotary-friction-welded aluminum to nodular cast iron |
SONG Yu-lai(宋雨来), LIU Yao-hui(刘耀辉), ZHU Xian-yong(朱先勇),YU Si-rong(于思荣), ZHANG Ying-bo(张英波) |
14 |
Formation mechanism of pulse current anodized film on AZ91D Mg alloy |
QIAN Jian-gang(钱建刚), WANG Chun(王纯), LI Di(李荻),GUO Bao-lan(郭宝兰), SONG Guang-ling(宋光铃) |
19 |
Densities of molten Ni-(Cr, Co, W) superalloys |
XIAO Feng(肖锋), YANG Ren-hui(杨仁辉), FANG Liang(方亮),LIU Lan-xiao(刘兰霄), ZHAO Hong-kai(赵红凯) |
24 |
Effect of Yb additions on microstructures and properties of 7A60 aluminum alloy |
FANG Hua-chan(方华婵), CHEN Kang-hua(陈康华), ZHANG Zhuo(张茁), ZHU Chang-jun(祝昌军) |
28 |
Formation and evolution properties of clusters in liquid metal copper during rapid cooling processes |
YI Xue-hua(易学华),, LIU Rang-su(刘让苏), TIAN Ze-an(田泽安),HOU Zhao-yang(侯兆阳), LI Xiao-yang(李晓阳), ZHOU Qun-yi(周群益) |
33 |
Microstructural evolution of aluminum alloy 7B04 thick plate by various thermal treatments |
LI Zhi-hui(李志辉), XIONG Bai-qing(熊柏青), ZHANG Yong-an(张永安),ZHU Bao-hong(朱宝宏), WANG Feng(王锋), LIU Hong-wei(刘红伟) |
40 |
Application of geometric midline yield criterion to analysis of three-dimensional forging |
ZHAO De-wen(赵德文), WANG Gen-ji(王根矶), LIU Xiang-hua(刘相华), WANG Guo-dong(王国栋) |
46 |
Effects of Al-10Sr master alloys on grain refinement of AZ31 magnesium alloy |
YANG Ming-bo(杨明波),, PAN Fu-sheng(潘复生), CHENG Ren-ju(程仁菊), TANG Ai-tao(汤爱涛) |
52 |
Microscopic phase-field simulation of atomic site occupation in ordering process of NiAl9Fe6 alloy |
LIANG Min-jie(梁敏洁), CHEN Zheng(陈铮), ZHANG Ji-xiang(张济祥), WANG Yong-xin(王永欣) |
59 |
Synthesis and grain growth kinetics of in-situ FeAl matrix nanocomposites (Ⅱ): Structural evolution and grain growth kinetics of mechanically alloyed Fe-Al-Ti-B composite powder during heat treatment |
REN Rong(任榕), WU Yu-cheng(吴玉程), TANG Wen-ming(汤文明),WANG Feng-tao(汪峰涛), WANG Tu-gen(王涂根), ZHENG Zhi-xiang(郑治祥) |
66 |
Deformation behavior of TC1 titanium alloy sheet under double-sided pressure |
WANG Zhong-jin(王忠金), SONG Hui(宋辉),WANG Zhe(王哲) |
72 |
Interfacial characteristics and dynamic mechanical properties of Wf/Zr-based metallic glass matrix composites |
MA Wei-feng(马卫锋), KOU Hong-chao(寇宏超), CHEN Chun-sheng(陈春生), LI Jin-shan(李金山),HU Rui(胡锐), XING Li-qian(刑力谦), ZHOU Lian(周廉), FU Heng-zhi(傅恒志) |
77 |
Synthesis of high-purity Ti2AlN ceramic by hot pressing |
YAN Ming(严明), CHEN Yan-lin(陈艳林), MEI Bing-chu(梅炳初), ZHU Jiao-qun(朱教群) |
82 |
Deformation behaviors of magnesium alloy AZ31 sheet in cold deep drawing |
YANG Lian-fa(杨连发), MORI Ken-ichiro, TSUJI Hirokazu |
86 |
Uniformity and continuity of effective strain in AZ91D processed by multi-pass equal channel angular extrusion |
ZHANG Xiao-hua(张晓华), LUO Shou-jing(罗守靖), DU Zhi-ming(杜之明) |
92 |
Influence of process parameters on microstructure of semisolid A356 alloy slug cast through vertical pipe |
YANG Xiao-rong(杨小容), MAO Wei-min(毛卫民), PEI Sheng(裴胜) |
99 |
Tungsten carbide platelet-containing cemented carbide with yttrium containing dispersed phase |
ZHANG Li(张立), CHEN Shu(陈述), WANG Yuan-jie(王元杰),YU Xian-wang(余贤旺), XIONG Xiang-jun(熊湘君) |
104 |
Microstructure evolution of components of ZAlSi8Cu3Fe alloy in processing of thixo-diecasting |
WANG Kai(王开), LIU Chang-ming(刘昌明), ZOU Mao-hua(邹茂华), HAN Zhao-tang(韩兆堂) |
109 |
Preparation of casting alloy ZL101 with coarse aluminum-silicon alloy |
YOU Jing(尤晶), WANG Yao-wu(王耀武), FENG Nai-xiang(冯乃祥), YANG Ming-sheng(杨明生) |
116 |
Reaction mechanism between oxide film on surface of Al-Li alloy and CsF-AlF3 flux |
XUE Song-bai(薛松柏), ZHANG Ling(张玲), HAN Zong-jie(韩宗杰), HUANG Xiang(黄翔) |
121 |
Microstructural characteristics and paint-bake response of Al-Mg-Si-Cu alloy |
JI Yan-li(纪艳丽), GUO Fu-an(郭富安), PAN Yan-feng(潘琰峰) |
126 |
Functional Materials |
Bonding mechanism of ultrasonic wedge bonding of copper wire on Au/Ni/Cu substrate |
TIAN Yan-hong(田艳红), WANG Chun-qing(王春青), Y. Norman ZHOU |
132 |
Applicability of Johnson-Mehl-Avrami model to crystallization kinetics of Zr60Al15Ni25 bulk amorphous alloy |
YAN Zhi-jie(闫志杰), DANG Shu-e(党淑娥), WANG Xiang-hui(王祥辉), LIAN Pei-xia(廉培霞) |
138 |
Influence of preparation methods on photoluminescence properties of ZnO films on quartz glass |
ZHAO Lei(赵磊), LIAN Jian-she(连建设), LIU Yu-hua(刘玉华), JIANG Qing(蒋青) |
145 |
Barium titanate ceramic inks for continuous ink-jet printing synthesized by mechanical mixing and sol-gel methods |
ZHOU Zhen-jun(周振君), YANG Zheng-fang(杨正方), YUAN Qi-ming(袁启明) |
150 |
Synthesis of tetrapod-shaped ZnO whiskers and microrods in one crucible by thermal evaporation of Zn/C mixtures |
DU Guo-ping(杜国平), LI Wang(李旺), FU Min-gong(付敏恭), CHEN Nan(陈楠),FU Xue(付雪), WAN Yi-qun(万益群), YAN Ming-ming(严明明) |
155 |
Preparation and mechanism of calcium phosphate coatings on chemical modified carbon fibers by biomineralization |
HUANG Su-ping(黄苏萍), ZHOU Ke-chao(周科朝), LI Zhi-you(李志友) |
162 |
Influence of sputtering parameters on microstructure and mechanical properties of GeSbTe films |
FU Yong-zhong(付永忠) |
167 |
Low-temperature sintering process for UO2 pellets in partially-oxidative atmosphere |
YANG Xiao-dong(杨晓东),, GAO Jia-cheng(高家诚), WANG Yong(王勇), CHANG Xin(畅欣) |
171 |
Electrochemical behavior and polishing properties of silicon wafer in alkaline slurry with abrasive CeO2 |
SONG Xiao-lan(宋晓岚), XU Da-yu(徐大余), ZHANG Xiao-wei(张晓伟),SHI Xun-da(史训达), JIANG Nan(江楠), QIU Guan-zhou(邱冠周) |
178 |
Mine Engineering, Metallurgical Engineering and Ch |
New mining technique with big panels and stopes in deep mine |
WANG Yi-ming(王贻明), WU Ai-xiang(吴爱祥),, CHEN Xue-song(陈学松),YANG Bao-hua(杨保华), SU Yong-ding(苏永定) |
183 |
Single and cooperative bioleaching of sphalerite by two kinds of bacteria——Acidithiobacillus ferriooxidans and Acidithiobacillus thiooxidans |
XIA Le-xian(夏乐先), LIU Jian-she(柳建设), XIAO Li(肖利), ZENG Jia(曾嘉),LI Ban-mei(李邦梅), GENG Mei-mei(耿梅梅), QIU Guan-zhou(邱冠周) |
190 |
Preparation of high-purity tantalum ethoxide by vacuum distillation |
YANG Sheng-hai(杨声海), CHEN Yong-ming(陈永明), YANG Hai-ping(杨海平),LIU Yin-yuan(刘银元), TANG Mo-tang(唐谟堂), QIU Guan-zhou(邱冠周) |
196 |
Thermal solidification of stainless steelmaking dust |
TANG Mo-tang(唐谟堂), PENG Ji(彭及), PENG Bing(彭兵), YU Di(余笛), TANG Chao-bo(唐朝波) |
202 |
Heavy metals contamination characteristics in soil of different mining activity zones |
LIAO Guo-li(廖国礼), LIAO Da-xue(廖大学), LI Quan-ming(李全明) |
207 |
Preparation of nickel nanoparticles in emulsion |
ZHANG You-xian(张有贤), FU Wen-jie(付文杰), AN Xue-qin(安学勤), |
212 |
Evaluation of reliability of Coats-Redfern method for kinetic analysis of non-isothermal TGA |
R. Ebrahimi-Kahrizsangi,, M. H. Abbasi |
217 |
Quantitative analysis of impurities in aluminum alloys by laser-induced breakdown spectroscopy without internal calibration |
LI Hong-kun(黎洪坤), LIU Ming(刘明), CHEN Zhi-jiang(陈志江), LI Run-hua(李润华) |
222 |