中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 18 No. 1 January 2008 |
（1. Materials Interfacial Physical-Chemistry Research Institute, Chongqing Institute of Technology,Chongqing 400050, China;2. Department of Applied Physics, Chongqing University, Chongqing 400044, China）
Abstract:In order to obtain more accurate density for molten Ni-(Cr, Co, W) binary alloy, the densities of molten pure Ni and Ni-Cr, Ni-Co, Ni-W alloys were measured with a sessile drop method. It is found that the measured densities of molten pure Ni and Ni-Cr, Ni-Co, Ni-W alloys decrease with increasing temperature in the experimental temperature range. The density of alloys increases with increasing W and Co concentrations while it decreases with increasing Cr concentration in the alloy at 1 773−1 873 K. The molar volume of Ni-based alloys increases with increasing W concentration while it decreases with increasing Co concentration. The effect of Cr concentration on the molar volume of the alloy is little in the studied concentration range. The accommodation among atomic species was analyzed. The deviation of molar volume from ideal mixing shows an ideal mixing of Ni-(Cr, Co, W) binary alloys.
Key words: Ni-Cr; Ni-Co; Ni-W; superalloy; density; molar volume
