| Materials Science and Engineering |
| Effect of pouring and mold temperatures on fluidity and hot tearing behavior of cast Al-Li-Cu-Mg-Sc-Zr-Ti alloy |
Yi-xiao WANG, Guo-hua WU, Liang ZHANG, You-jie GUO, Xin TONG, Liang-bin LI, Xun-man XIONG |
669 |
| Evolution of precipitates and mechanical properties of T6-treated and thermally exposed WAAM-ZL205A alloy |
Hai-jiang LIU, Yan FENG, Chao-qun PENG, Zhi-yong CAI, Meng WANG, Zi-ming LI, Zhi-jie KANG, Xiao-di ZHANG |
684 |
| Wire arc additive manufacturing of Al-Si-Mg aluminum alloy through wire-powder synchronous deposition |
Yun-fei MENG, Qian-xi YU, Xu WU, Ming GAO, Hui CHEN |
701 |
| Influence of geometric configurations on friction characteristics during incremental forming process of AA5052 sheet metal |
Guang-can YANG, Da-wei ZHANG, Chong TIAN, Sheng-dun ZHAO |
715 |
| A novel constitutive model for two-stage creep aging process of 7B50 aluminum alloy and its application in springback prediction |
Ling-zhi XU, Can-yu TONG, Chang-zhi LIU, Li-hua ZHAN, Ming-hui HUANG, You-liang YANG, Dong-yang YAN, Jian-hua YIN, Hui XIA, Yong-qian XU |
734 |
| Effect of hierarchical cell structure and internal pores on mechanical properties of thixomolded AZ91D magnesium alloy |
Li-dong GU, Xiao-qing SHANG, Jie WANG, Jun-jun DENG, Zhen ZHAO, Xiao-qin ZENG |
749 |
| Effects of Zr addition on mechanical properties and in vitro degradation behavior of Mg-1.0Yb cast alloy |
Zhuo-zhang WEN, Lu LI, Xue BAI, Wei ZHOU, Zhen-ni ZHOU, Peng XUE, Jing LI, Xian-quan JIANG |
765 |
| Comparison of edge crack behavior of Mg-3Al-1Zn sheets rolled from as-cast, as-rolled and as-extruded alloys |
Qiu-yan SHEN, Shang-yi ZHANG, Qiang LIU, Jiang-feng SONG, Dong-xia XIANG, Bin JIANG, Fu-sheng PAN |
788 |
| Room temperature strengthening and quasi-superplasticity behavior in superlight Mg-3.11Li-2.31Al-1.95Sn-0.94Y-0.45Er alloy processed by multidirectional forging and asymmetric rolling |
Fu-rong CAO, Nan-pan GUO, Pan-ning XU, Guang-ming XU |
800 |
| Simultaneous enhancement of strength and thermal conductivity of extruded Mg-Mn-Zn alloy via hot compression |
Hai-feng LIU, Xu-yue YANG, Yu-xiu ZHANG, Hiromi NAGAUMI, Ming-chun ZHAO, Zhi-yong SHI, Andrej ATRENS |
819 |
| Electrochemical behavior and discharge performance of as-rolled precipitate-free Mg-Sn alloy as anode for Mg-air batteries |
Xu LI, Wei-li CHENG, Jian LI, Fei-er SHANGGUAN, Hui YU, Li-fei WANG, Hang LI, Hong-xia WANG, Jin-hui WANG, Hua HOU |
832 |
| Effect of Hf and Ta on creep deformation behaviors of PM Ni-based superalloys |
Hao-peng ZHANG, Jia-ming BAI, Xin-yu LI, Xiao-kun LI, Jian JIA, Jian-tao LIU, Yi-wen ZHANG |
849 |
| Creep-fatigue lifetime prediction of GH720Li superalloy considering effect of grain size |
Bin ZHANG, Rong-qiao WANG, Dian-yin HU, Hong-bo LI, Kang-he JIANG, Jia-ming WEI, Hong ZHANG |
863 |
| Superb strength-ductility synergy in Si added metastable high-entropy alloys at cryogenic temperature via reinforced TRIP effect |
Zhan-jiang LI, Yi-xi HOU, Li CHEN, Qing-xin CHEN, Jun-feng CHEN, Fa CHANG, Pin-qiang DAI, Qun-hua TANG |
872 |
| Effect of trace cerium addition on hot deformation behavior of ultrahigh-purity copper containing sulfur |
Ke-xing SONG, Yun-xiao HUA, Hai-tao LIU, Yan-min ZHANG, Chao-min ZHANG, Yan-jun ZHOU, Tao HUANG |
888 |
| Improving mechanical properties of extrusion additive manufacturing WC-9Co cemented carbide via green warm isostatic pressing |
Cai CHEN, Run-xing ZHOU, Zu-ming LIU, Yong-xia LI, Dan ZOU, Yi-ming CHANG, Xu-lin CHENG |
902 |
| Fabrication of Ti/SnOx/MnO2 anodes with enhanced catalytic performance for oxygen evolution reactions |
Ya CHEN, Yuan-he JIANG, Peng-hui PING, Jiu-qing LIU, Xi-chang SHI |
921 |
| High magnetic field-induced structural transformation of NiFe2O4/Fe2O3 heterostructures for enhancing lithium storage performance |
Jia-qi LIU, Rong-yuan ZHANG, Xiao-yang WANG, Jun WANG, Tie LIU, Wei-bin CUI, Qiang WANG, Shuang YUAN |
932 |
| Mining, Minerals Processing and Metallurgical Engineering |
| 3D inversion imaging of self-potential current source induced by mineral polarization |
Li-juan ZHANG, Yi-an CUI, Jing XIE, Jian-xin LIU |
945 |
| Selective flotation separation of ilmenite from titanaugite using n-octylphosphonic acid as collector in acidic pulp |
Pan CHEN, Jia-yan LIU, Ji-hua ZHAI, Yao-hui YANG, Wei SUN |
954 |
| In-situ reduction mechanism of hematite by bastnaesite during suspension magnetization roasting |
Wen-bo LI, Shao-kai CHENG, Rui QU, Ji-jia CHEN |
965 |
| Recovery of polymetallic elements from cyanide tailings via reduction smelting |
Gong-hao LI, Fen JIAO, Chen LI, Si-yu GU, Shi-yang LIU, Xin WEI |
975 |
| Competitive behaviors between tungsten and iron in TBP-HCl-H2O extraction system |
Li-qin DENG, Xu-heng LIU, Xing-yu CHEN, Jiang-tao LI, Li-hua HE, Feng-long SUN, Zhong-wei ZHAO |
990 |
| Kinetic study of ultrasonic-assisted vanadium(V) adsorption by supported bifunctionalizedized ionic liquid |
Jia-hao ZHOU, Shen-xu BAO, Yi-min ZHANG, Bo CHEN, Yu LIANG, Xiao-chuan HOU, Si-yuan YANG, Yang PING |
1000 |
