| Materials Science and Engineering |
| Effect of deep cryogenic cycling treatment on structure and properties of metallic glass: A review |
Ming-zi WANG, Wei GUO, Shu-lin Lü, Shu-sen WU |
2879 |
| Microstructure and properties of Al-2Mg-0.5Mn alloy with narrow crystallization temperature range realized by adding trace elements |
Meng-jia LI,En-gui ZHANG, Shu-yu LIU, Xiang-dong WANG, Yun-jia SHI, Jian-zheng WU, Shao-kang GUAN |
2898 |
| Combining pre-rolling with retrogression and re-aging treatment to balance strength and corrosion resistance of 7A99 Al alloy |
Tao ZHANG, Yu-zhu HOU, Biao-hua QUE, Yu-xin TIAN, Liang CHEN |
2913 |
| Multi-scale simulation of flow behavior and microstructure evolution for AA2219 alloy during multi-pass ring rolling process |
Fang DONG, Tao ZHANG, Yun-xin WU, Lei LIU, Tie-wen HAO |
2926 |
| Atomic-level insights on enhanced strength and ductility of Al-Mg-Si alloys with β2-Mg5Si6 at cryogenic temperatures |
Gang LEI, Hai-tao GAO, Yun ZHANG, Xiao-hui CUI, Hai-liang YU |
2943 |
| Improved mechanical properties of Mg-3Al-1Zn alloy sheets with TD-preferred texture prepared via turned bearing extrusion |
Lin-tao LIU, Sheng-wen BAI, Bin JIANG, Chao HE, Qing-hang WANG, Ming YUAN, Guang-sheng HUANG, Ding-fei ZHANG, Fu-sheng PAN |
2955 |
| Statistical investigation of deformation mechanisms in rolled Mg sheet during compression |
Dong-di YIN, Bo CHEN, Yan-qin CHAI, You-fu WAN, Hao ZHOU, Jiang ZHENG, Qu-dong WANG, Ying ZENG |
2970 |
| Quantitative study of geometric characteristics and formation mechanism of porosity defects in selective laser melted Ti6Al4V alloy by micro-computed tomography |
Na-ying AN, San-san SHUAI, Chao-yue CHEN, Li-ming LEI, Jiang WANG, Zhong-ming REN |
2986 |
| Fatigue crack propagation behavior in Ti-6Al-4V alloy with surface gradient structure fabricated by high-energy shot peening |
Wen-guang ZHU, Chi MA, Cong-hui ZHANG, Kun HU, Xiang-kang ZENG |
3003 |
| Environment-dependent phase stabilities of titanium hydrides: First-principles prediction |
Chun-lei SHEN, Yi LIU, Yu-xiang GONG, Zheng-qing LIU, Yong JIANG, Can-hui XU, Xiao-song ZHOU, Xing-gui LONG |
3017 |
| Microstructure and mechanical properties of ultrasonic welded copper to aluminum cables joints |
Xian-ming CHENG, Ke YANG, Si-zhan LIU, Shan-lin JI, Jian WANG |
3027 |
| Selective phase corrosion and cavitation erosion behaviors of various copper alloys in 3.5% NaCl solutions with different pH values |
Qi-ning SONG, Hui-lin LI, Nan XU, Zhen-yu JIANG, Gen-yuan ZHANG, Ye-feng BAO, Yong-feng JIANG, Li-juan ZHAO, Cui-cui JI, Jian-hua ZHAO, Yan-xin QIAO |
3039 |
| Oxidation behavior and intermetallic compound growth dynamics of SAC305/Cu solder joints under rapid thermal shock |
Ming WU, Shan-lin WANG, Li-meng YIN, Yu-hua CHEN, Min HONG, Wen-jun SUN, Zong-xiang YAO, Jia-ming NI, Peng LU, Ti-ming ZHANG, Ji-lin XIE |
3054 |
| Effect of square wave potential polarity and amplitude on property of trivalent chromium conversion coating applied on Zn-Al hot-dip coating |
Jie PAN, Yang CHENG, Ya-jing DING, Rui-cheng ZHAO, Tao JIANG, Zhen-liang FENG, Yan LI |
3067 |
| Evaluation of tensile property and strengthening mechanism of molybdenum alloy bars doped with different ultrafine oxides |
Liu-jie XU, Tie-long SUN, Yu-cheng ZHOU, Zhou LI, Shi-zhong WEI |
3083 |
| Na+-doped layered LiNi1/3Co1/3Mn1/3O2 cathode derived from low nickel matte with high structural stability and fast diffusion kinetics |
Meng-chen LIAN, Qiang-chao SUN, Wei NIE, Yan-bo LIU, Tong DUAN, Hong-wei CHENG, Xiong-gang LU |
3100 |
| Effect of Al2O3 insertion layer on ferroelectricity in HfO2/ZrO2 nanolaminates |
Hai-yan CHEN, Yong-hong CHEN, Qiu-ju LIANG, Zhi-guo WANG, Jun CAO, Dou ZHANG |
3113 |
| Interaction and mechanism between arginine functionalized hydroxyapatite nanoparticles and human umbilical vein endothelial cells |
Zi-chang LIN, Bin-long CHEN, Shi LIU, Yan-yan HUANG, Yan-zhong ZHAO |
3122 |
| Mining, Minerals Processing and Metallurgical Engineering |
| A review of tantalum resources and its production |
Xue WEI, Long-gong XIA, Zhi-hong LIU, Le-ru ZHANG, Qi-hou LI |
3132 |
| Separation of molybdenite from chalcopyrite with thiolactic acid depressant: Flotation behavior and mechanism |
Wei-xin HUANG, Hong-hu TANG, Yang CAO, Ruo-hua LIU, Wei SUN |
3157 |
| Viscosity of slags from joint smelting of oxidized nickel and sulfide copper ores |
Alexander KLYUSHNIKOV, Svetlana SERGEEVA, Roza GULYAEVA, Alexander VUSIKHIS, Lyudmila UDOEVA, Stanislav TYUSHNYAKOV |
3168 |
| Purification of crude indium by two-stage cyclone electrowinning |
Qing-hua TIAN, Bo DONG, Xue-yi GUO, Dong LI, Zou-jiang LI, Zhi-peng XU |
3185 |
| Arsenic extraction from copper concentrate using controlled oxidative roasting and filtration process |
Xiao-wei TANG, Yue-hui HE |
3198 |
| Adsorption mechanism of copper and gold thiosulfates onto activated carbon |
Feng XIE, Jun-nan CHEN, Xiao-zhen ZHANG, Bin XU, Wei WANG |
3210 |
| Pollution characteristics and ecological risk apportionment at a smelting site based on stochastic simulation |
Xing-hua LUO, Jia-qing ZENG, Chuan WU, Kun-yan QIU, Chao-ran LI, Wen-shun KE, Sheng-guo XUE |
3222 |
