MATERIALS SCIENCE AND ENGINEERING |
Relationships among technologies, microstructures and mechanical properties of TiAl-based alloys |
PENG Chao-qun, HUANG Bai-yun, HE Yue-hui |
527 |
Formation and control of turbulent in metal melts purified by alternating magnetic field |
ZHONG Yun-bo, REN Zhong-ming, DENG Kang, JIANG Guo-chang, XU Kuang-di |
541 |
Effect of new flux including rare earth on A356 alloy |
NI Hong-jun, SUN Bao-de, JIANG Hai-yan, DING Wen-jiang |
547 |
Effects of heat treatment and heat cycle on transformation temperature and structure of Ni-49.12%Ti sputter-depositing film |
QIU Ping-Shan, LI Dan, GUO Li-wei,HUANG Wei-xin, WANG Gui-song |
553 |
Hydrogen diffusion in palladium nano-crystal film |
YANG Rui-peng, CAI Xun, CHEN Qiu-long |
558 |
Corrosion of Cu-Cr alloys in H2-H2S mixture |
FU Guang-yan, NIU Yan, WU Wei-tao |
562 |
Kinetics of preparation of titanium boride by SHS |
ZHANG Ting-an, YANG Huan, NIU Li-ping, ZHANG Guo-yue, XU Shu-xiang, HE Ji-cheng |
567 |
Structural evolution of AZ91D magnesium alloy during semi-solid isothermal heat treatment |
LI Yuan-dong, HAO Yuan, YAN Feng-yun, FANG Ming |
571 |
Fabrication of W/Cu functionally gradient material by graded sintering under ultrahigh pressure |
LING Yun-han, ZHOU Zhang-jian,LI Jiang-tao, YANG Da-zheng, GE Chang-chUn |
576 |
Effect of surface coating by ball milling on cycle stability of Mg-based hydrogen storage electrodes |
ZHANG Yao, LI Shou-quan, YING Tiao,LEI Yong-quan, WANG Qi-Dong |
582 |
Effects of heat-treatment temperature on microstructure and electrochemical properties of AB5 type MlNi 3.60Co 0.85Mn 0.40Al 0.15 hydide electrode alloy |
MA Jian-xin, PAN Hong-ge, TIAN Qing-hua, ZHU Yun-feng, LI Shou-quan, CHEN Chang-pin |
587 |
Hot deformation behaviors of AA7005 aluminium alloy |
SHEN Jian |
593 |
Recrystallization textures of high-purity aluminum foil annealed with an electric field |
JIANG Qi-wu, WANG Cun-sheng,WANG Fu, ZUO Liang, WANG Zhi-guo |
598 |
Effects of on-line extrusion quenching technique on mechanical properties and microscopic structure of 6005A alloys employed in underground railway trains |
WANG Zhi-wei, WANG Ming-pu, WANG Zheng-an,LI Zhou, YIN Zhi -min, PENG Zhi-Hui,LIU Jing-an, SUN Xi-nan |
603 |
Influence of Zn content and residual strain on curve of resistivity vs temperature of Cu-8%~13%Zn alloys |
LUO Feng-hua, YIN Zhi-min, WANG Ming-pu, ZUO Tie-yong |
607 |
Friction and wear properties of PA1010 composites filled with La2O3 |
XIONG Dang-sheng, CHEN Lei, WANG Zhen-zhong |
611 |
Wear investigation of self-lubrication material slid friction |
DING Hua-dong, FU Su-li, ZHU You-li,WANG Yong-lan, JIN Zhi-hao |
616 |
Crystallization of Ni-P-ultrafine diamond(UFD) composite coating |
XIE Hua, CHEN Wen-zhe, QIAN Kuang-wu |
621 |
Static and cyclic creep behavior of ZL107 alloy |
WANG Shan-ling, SHEN Bao-luo,GAO Sheng-ji, LI Da, TU Ming-jin,YU Wei-cheng, YAO Ge |
626 |
Microstructures and mechanical properties of (SiCp+C)/MoSi2 composite |
LIU Bo-wei, PAN Jin,FAN Yi, ZHANG Jin-sheng |
631 |
Influence of Ce rare-earth on ignition temperature of magnesium alloy |
HUANG Xiaofeng, ZHOU Hong, HE Zhenming |
638 |
Characteristics of Al, Mg, Si and Cu element powders by mechanical alloying |
FENG Zhong-xin, XI Sheng-qi, ZHANG Dong-wen,SONG Xing-wen, ZHOU Jing-en |
642 |
Al-Cu-Fe nano-amorphous alloy prepared by mechanical alloying |
HUANG Wei-qing, WANG Ling-ling,DENG Hui-qiu, HU Wang-yu, ZHAO Li-hua |
647 |
Investigation of solvent debinding process on tungsten heavy alloy injection parts |
FAN Jing-lian, XIA Pei-hua, HU Qing, QU Xuan-hui, HUANG Bai-yun, SUN Ling |
651 |
Influence of machining processes on surface microphotograph and microstructure of fastening holes |
PEI Xu-ming, CHEN Wu-yi,REN Bing-yi, HAN Yu |
655 |
MINING, MINERAL PROCESSING AND ME |
Wave propagation and mechanism of aided flow by vibration in granular flow field |
WU Ai-xiang, SUN Ye-zhi, LI Jian-hua |
661 |
Ground pressure and control techniques in non-pillar continuous mining method |
DENG Jian, LI Xi-bing, GU De-sheng |
666 |
Reliability analysis of temporary ore wall structure in non-pillar continuous mining |
DENG Jian, GU De-sheng, LI Xi-bing |
671 |
Investigation on paste pumping characteristics and reducing pumping resistance |
FANG Li-gang |
676 |
Mechanism of dispersion and aggregation in reverse flotation for bauxite |
LUO Zhao-jun, HU Yue-hua, WANG Yu-hua, QIU Guan-zhou |
680 |
Crystal structure and surface property of kaolinite in hard kaolins and soft kaolins |
LIU Xiao-wen, HU Yue-hua, JIANG Hao, CAO Xue-feng, Qiu Guan-zhou |
684 |
Mechanism of flotation for diaspore and aluminium-silicate minerals with alkyl-amine collectors |
JIANG Hao, HU Yue-hua, QIN Wen-qing,WANG Yu-hua, WANG Dian-zuo |
688 |
Flotation mechanism of aluminium silicate minerals with N-dodecyl-1,3-diaminopropane |
CAO Xue-feng, HU Yue-hua,JIANG Yu-ren, LI Hai-pu |
693 |
Interaction mechanism between modified starches and aluminum-silicate minerals |
LI Hai-pu, HU Yue-hua, JIANG Yu-ren, WANG Dian-zuo |
697 |
Synthesis and structure—activity relationships of carboxyl hydroxidoxime in bauxite flotation |
JIANG Yu-ren, HU Yue-hua, CAO Xue-feng |
702 |
Phase transfer catalyzed synthesis and flotation performance of biphenoxyl bi(acetic acid) |
ZHANG Jian-feng, HU Yue-hua, WANG Dian-zuo |
707 |
A new collector RL for flotation of bauxite |
ZHANG Guo-fan, LU Yi-ping, OU Le-ming, FENG Qi-ming |
712 |
Numerical simulation and on-line display of freeze profile of reaction shaft in flash smelting furnace |
MEI Chi, CHEN Zhuo, REN Hong-jiu,ZHANG Wei-hua, WU Jun |
716 |
Calculation of permitted maximum total soda mass concentration in aluminate hydrate wash liquor and process change scheme |
WANG Long-zhang, GAN Guo-yao, LIU Bao-wei |
721 |
Chemical phase changes of silver in lime roast prosess of silver-gold concentrate |
XU Sheng-ming, CHI Ru-an, XU Jing-ming,ZHU Guo-cai, ZHANG Chuan-fu |
726 |