Transactions of Nonferrous Metals Society of China
中国有色金属学报(英文版)
Vol. 11 No. 3 June 2001 |
MATERIALS SCIENCE AND ENGINEERING | ||
Multiple steady state phenomenon in martensitic transformation |
QIN Wen(覃文), CHEN Zhen-hua(陈振华),HUANG Pei-yun(黄培云), ZHUANG Ying-hong(庄应烘) | 319 |
Hydrothermal synthesis and magnetic property of NaV2O5 nanorods |
GUI Zhou(桂宙), FAN Rong(樊荣),CHEN Xian-hui(陈仙辉), HU Yuan(胡源), WU Yi-cheng(吴以成) | 324 |
Influence of size of seed grains and sintering condition on varistor properties of ZnO-Bi2O3-TiO2-Sb2O3 ceramics |
XU Qing(徐庆), CHEN Wen(陈文), YUAN Runzhang(袁润章)) | 328 |
Oxidation of two-phase Cu-Cr alloys with different microstructures |
FU Guang-yan(付广艳), NIU Yan(牛焱),WU Wei-tao(吴维 tao), GUAN Heng-rong(管恒荣) | 333 |
Deoxidization of CuCr25 alloys prepared by vacuum induction melting |
ZHANG Cheng-yu(张程煜), WANG Jiang(王江),ZHANG Hui(张晖), YANG Zhi-mao(杨志懋), DING Bing-jun(丁秉钧) | 337 |
Evolution of microstructure and dimension of as-molded parts during thermal removal process of wax-based MIM binder |
LI Yi-min(李益民), HUANG Bai-yun(黄伯云), LI Song-lin(李松林),ZENG Zhou-shan(曾舟山), QU Xuan-hui(曲选辉) | 340 |
Binder composition and debinding process in PIM of AlN | LIN Jian-liang(林健凉), QU Xuan-hui(曲选辉), HUANG Dong-sheng(黄栋生), LI Du-xin(李笃信), QIN Ming-li(秦明礼) | 345 |
High-temperature electrochemical performance and phase composition of Ti0.7Zr0.5V0.2Mn1.8-xNix hydrogen storage electrode |
XU Yan-hui(徐艳辉), CHEN Chang-pin(陈长聘),LI Shou-quan(李寿权), YING Tiao(应窕), WANG Qi-dong(王启东) | 350 |
Analysis of filling process of Ti6Al4V alloy melt poured in permanent mold during centrifugal casting process |
SHENG Wen-bin(盛文斌), LI Dong(李东), YANG Rui(杨锐),LIU Yu-yin(刘羽寅), GUO Jing-jie(郭景杰), JIA Jun(贾均) | 353 |
Influence of element Cu on hydrogen content in superheated aluminum melt |
LI Xi-zhen(李喜珍), BIAN Xiu-fang(边秀房),LI Xiu-jun(李秀军), WANG Li(王丽) | 358 |
Numerical simulation of temperature and strength distributions of mold(core) on heating |
WEI Zun-jie(魏尊杰), WANG Chang-wen(王长文), AN Ge-ying(安阁英) | 361 |
Calculation of power consumption and induced heat for EMC aluminum ingots |
CAO Zhi-qiang(曹志强), ZHANG Xing-guo(张兴国),LI Zhao-xia(李朝霞), JIN Jun-ze(金俊泽) | 365 |
Temperature simulation of EMC aluminum ingot with induced heat |
LI Zhao-xia(李朝霞), ZHENG Xian-shu(郑贤淑),CAO Zhi-qiang(曹志强), JIN Jun-ze(金俊泽) | 369 |
Refinement and thermal analysis of hypereutectic Al-25%Si alloy |
ZHANG Zhong-hua(张忠华), BIAN Xiu-fang(边秀房),WANG Yan(王艳), LIU Xiang-fa(刘相法) | 374 |
Numerical simulation of semisolid continuous casting process |
LI Ya-min(李亚敏), XING Shu-ming(邢书明), ZHAI Qi-jie(翟启杰) | 378 |
Recrystallization model for hot-rolling of 5182 aluminum alloy |
ZHANG Hui(张辉), PENG Da-shu(彭大暑),YANG Li-bin(杨立斌), MENG Li-ping(孟力平) | 382 |
Microstructures and properties of tungsten inert gas welding joint of super-eutectic ZA alloy |
LIU Xiu-zhong(刘秀中), DONG Bo-ling(董博玲), ZHAO Dong-jian(赵东建), ZHU Xing-hai(朱兴海) | 387 |
New model of body force in electromagnetic stirring gas tungsten-arc welding |
LUO Jian(罗键) | 391 |
Mechanical properties and deformation behavior of Ti-5Al-2.5ZrELI alloy used at cryogenic temperature |
LIU Ya-xiu(刘雅秀), QIAN Dong-fan(千东范),GAO Bao-dong(高宝东), WANG Jiang-bo(王江波),WANG Xiao-hua(王晓华), FENG Zhao-wei(冯昭伟) | 395 |
Thermal residual stresses and stress distributions under tensile and compressive loadings of short fiber reinforced metal matrix composites |
DING Xiang-dong(丁向东), LIAN Jian-she(连建设), JIANG Zhong-hao(江中浩), SUN Jun(孙军) | 399 |
Microstructures and properties of transient liquid phase diffusion bonded joints of Ni3Al-base superalloy |
LI Xiao-hong(李晓红), MAO Wei(毛唯), CHENG Yao-yong(程耀永) | 405 |
Relationship between solid fraction and distribution of Pb in Al-Pb ingot |
ZHANG Peng(张鹏), DU Yun-hui(杜云慧), ZENG Da-ben(曾大本), REN Xue-ping(任学平), CUI Jian-zhong(崔建忠), BA L-min(巴立民)409 |
|
Corrosion resistance of electrodeposited RE-Ni-W-P-SiC composite coating |
GUO Zhong-cheng(郭忠诚), ZHU Xia-yun(朱晓云), YANG Xian-wan(杨显万 | 413 |
Tribological performance of nanometer samarium borate | HUANG Wei-jiu(黄伟九), WANG Jiu(王九), WANG Ying-fang(王应芳), LI Wei-li(李慰立),CHEN Bo-shui(陈波水) | 417 |
Design and preparation of Zn-based materials possessing both high damping and good mechanical properties |
YANG Liu-shuan(杨留栓) | 421 |
MINERAL PROCESSING, METALLURGY AND CHEMISTRY | ||
Modeling of thermodynamic properties of multi-component electrolyte solutions |
FANG Zheng(方正), FANG Yuan(方圆),ZHANG Quan-ru(张全茹), LI Yuan-gao(李元高) | 425 |
Interaction and flotation of diaspore with alkylamine hydrochlorides |
QIN Wen-qing(覃文庆), HU Yue-hua(胡岳华), QIU Guan-zhou(邱冠周), JIANG Hao(蒋昊) | 430 |
Leaching hydrodynamics of weathered elution-deposited rare earth ore |
TIAN Jun(田君), CHI Ru-an(池汝安), ZHU Guo-cai(朱国才),XU Sheng-ming(徐盛明), QIU Xin(邱欣), ZHANG Zhi-geng(张志庚) | 434 |
Attenuating water hammer pressure by means of gas storage tank |
HAN Wen-liang(韩文亮), HAN Jun(韩军),FANG Hong-wei(方红卫),ZOU Wei-sheng(邹伟生), XIA Jian-xin(夏建新) | 438 |
Optimization of grinding in reverse flotation for bauxite |
LUO Zhao-jun(骆兆军), WANG Yu-hua(王毓华),HU Yu-hua(胡岳华), QIU Guan-zhou(邱冠周) | 444 |
Synthesis and characterization of La doped M-type hexagonal barium ferrite fine powders |
LI Hong-gui(李洪桂), GUO Rui-qian(郭睿倩),SUN Pei-mei(孙培梅), LI Yun-jiao(李运姣), ZHAO Zhong-wei(赵中伟), LIU Mao-sheng(刘茂盛), SU Peng-tuan(苏鹏抟) | 447 |
Preparation of Gd-Ni alloy film in urea-NaBr melt | TONG Ye-xiang(童叶翔), LIU Li-zhi(刘莉治),XU Chang-wei(徐常威), LIU Gui-hua(刘贵华), YANG Qi-qin(杨绮琴) | 451 |
Specific heat of superheated Al-10Sr alloy melts | WANG Yan(王艳), BIAN Xiu-fang(边秀房),ZHANG Zhong-hua(张忠华), SUN Yi-min(孙益民) | 455 |
Activities of binary baths with 1% solute as standard states |
LE Qi-chi(乐启炽), LU Gui-min(路贵民),CUI Jian-zhong(崔建忠) | 458 |
Mechanism explanation for SO2 oxidation rate of Cs-Rb-V series sulfuric acid catalyst at low temperature |
CHEN Zhen-xing(陈振兴), YE Hua(叶华),LIU Jin(刘今), LI Hong-gui(李洪桂) | 462 |
Computer prediction system on solid/solid reaction kinetics |
LUO Shi-yong(罗世永), ZHANG Jia-yun(张家芸),ZHOU Tu-ping(周土平) | 466 |