中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 33 No. 6 June 2023 |
（1. College of Mechanical and Electrical Engineering, Hohai University, Changzhou 213022, China;
2. National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044, China;
3. College of Material Science and Engineering, Chongqing University, Chongqing 400044, China）
Abstract:AZ31B magnesium alloy prepared by conventional friction stir processing (FSP) usually exhibits an intense basal texture, resulting in an unsatisfactory strength and ductility. In this work, cooling medium-assisted FSP was conducted on the AZ31B magnesium alloy. The effects of a liquid CO2 coolant on the thermal cycle, microstructure, and mechanical properties of the stir zone (SZ) were evaluated. The adoption of a liquid CO2 coolant resulted in markedly decreased peak temperature and increased cooling rate. The SZ exhibited a fine grain structure with abundant dislocations and twins. The grain refinement mechanism was attributed to the combinational effect of discontinuous dynamic recrystallization, continuous dynamic recrystallization, and twinning-induced geometric dynamic recrystallization. The SZ showed a best combination of ultimate tensile strength of 293 MPa and fracture elongation of 18.6%. The interaction of dislocations and twins rendered the plastic deformation more stable during tensile testing.
Key words: Mg alloy; friction stir processing; Zenner-Hollomon parameter; recrystallization; microstructural evolution; mechanical properties
