中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 11 November 2021 |
（1. Mechanical Engineering Department, College of Engineering, United Arab Emirates University, Al-Ain, P.O. Box. 15551, United Arab Emirates;
2. Mechanical Design Department, Faculty of Engineering, Helwan University, Cairo, Egypt;
3. National Water and Energy Center, United Arab Emirates University, Al Ain 15551, United Arab Emirates;
4. Civil, Construction and Environmental Engineering Department, College of Engineering, University of Alabama – Birmingham, Birmingham, AL, USA;
5. Department of Mechanical & Manufacturing Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, India）
Abstract:Welding is a vital component of several industries such as automotive, aerospace, robotics, and construction. Without welding, these industries utilize aluminum alloys for the manufacturing of many components or systems. However, fusion welding of aluminum alloys is challenging due to several factors, including the presence of non-heat-treatable alloys, porosity, solidification, and liquation of cracks. Many manufacturers adopt conventional in-air friction stir welding (FSW) to weld metallic alloys and dissimilar materials. Many researchers reported the drawbacks of this traditional in-air FSW technique in welding metallic and polymeric materials in general and aluminum alloys and aluminum matrix composites in specific. A number of FSW techniques were developed recently, such as underwater friction stir welding (UFSW), vibrational friction-stir welding (VFSW), and others, for welding of aluminum alloy joints to overcome the issues of welding using conventional FSW. Therefore, the main objective of this review is to summarize the recent trends in FSW process of aluminum alloys and aluminum metal matrix composites (Al MMCs). Also, it discusses the effect of welding parameters of the traditional and state-of-the-art developed FSW techniques on the welding quality and strength of aluminum alloys and Al MMCs. Comparison among the techniques and advantages and limitations of each are considered. The review suggests that VFSW is a viable option for welding aluminum joints due to its energy efficiency, economic cost, and versatile modifications that can be employed based on the application. This review also illustrated that significantly less attention has been paid to FSW of Al-MMCs and considerable attention is demanded to produce qualified joint.
Key words: aluminum alloys; aluminum matrix composites; traditional FSW techniques; state-of-the-art FSW techniques; microstructure; mechanical properties
