中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 10 October 2021 |
（1. Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China;
2. Ningbo Institute of Dalian University of Technology, Ningbo 315000, China;
3. Orthopaedic Department, Shanghai Jiao Tong University Affiliated Sixth People’s Hospital, Shanghai 200233, China）
Abstract:The microstructural observation, the mass loss test, potentiodynamic polarization measurements and corrosion morphology examinations were conducted to study the influence of microstructural characteristics on corrosion behavior of Mg–5Sn–3In alloys in Hank’s solution after extrusion. The results show that the corrosion rate of the as-cast alloy is similar to that of as-extruded alloy; however, the local corrosion susceptibility is greatly weakened in the as-extruded alloy, especially in the extrusion direction. The relatively uniform corrosion morphology of the as-extruded alloy is attributed to refined Mg2Sn particles, uniform distribution of Mg2Sn particles and favorable crystal orientation. Meanwhile, the cytotoxicity tests confirm that the Mg–5Sn–3In alloy exhibits cytotoxicity of Grade 0-1 for NIH3T3 cells, suggesting an acceptable cytotoxicity of this alloy in the vitro assay.
Key words: Mg–Sn alloy; indium element; microstructure; corrosion behavior; cytotoxicity
