中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
Vol. 31 No. 5 May 2021 |
(Mechanical Engineering Department, NIT Agartala, Tripura-799046, India)
Abstract:Present work encapsulated the friction and wear behaviour of aluminium matrix composites reinforced with different mass fractions of titanium diboride (TiB2) particles, synthesized by stir casting. A pin on disc tribotester was employed for conducting the dry sliding wear tests of Al2024-TiB2 composites. The tests were performed adopting various parameters like load, sliding distance and sliding velocity for investigating the effect of tribological parameters on the prepared composites. Microstructural characterization confirmed uniform dispersion of TiB2 particles and good matrix-reinforcement bonding. Results of the experiments revealed that, low friction and wear rates were observed in the developed composites compared to Al2024 alloy, whereas wear rates of both Al2024 alloy and fabricated composites increased with the increase in load, sliding velocity and sliding distance. However, friction coefficient of both Al2024 alloy and fabricated composites reduced with the increase in applied load but rose with the increase in sliding velocity and sliding distance. SEM studies of the worn surfaces and debris depicted that enhancement in wear resistance can be ascribed to finer debris formation.
Key words: Al2024 alloy; TiB2; stir casting; friction; wear