中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 23 No. 4 April 2013 |
（1. Department of Mechanical Engineering, St. Peter’s Engineering College, Avadi, Chennai 600 054, Tamil Nadu, India;
2. Department of Production Technology, MIT, Anna University, Chennai 600 044, Tamil Nadu, India;
3. Center for Materials Joining and Research (CEMAJOR), Department of Manufacturing Engineering,Annamalai University, Annamalainagar 608 002, Tamil Nadu, India;
4. IGCAR-Kalpakkam, Chennai, India）
Abstract:Silicon carbide particulate (SiCp) reinforced cast aluminium (Al) based metal matrix composites (MMCs) have gained wide acceptance in the fabrication of light weight structures requiring high specific strength, high temperature capability and good wear resistance. Friction stir welding (FSW) process parameters play major role in deciding the performance of welded joints. The ultimate tensile strength, notch tensile strength and weld nugget hardness of friction stir butt welded joints of cast Al/SiCp MMCs (AA6061 with 20% (volume fraction) of SiCp) were investigated. The relationships between the FSW process parameters (rotational speed, welding speed and axial force) and the responses (ultimate tensile strength, notch tensile strength and weld nugget hardness) were established. The optimal welding parameters to maximize the mechanical properties were identified by using desirability approach. From this investigation, it is found that the joints fabricated with the tool rotational speed of 1370 r/min, welding speed of 88.9 mm/min, and axial force of 9.6 kN yield the maximum ultimate tensile strength, notch tensile strength and hardness of 265 MPa, 201 MPa and HV114, respectively.
Key words: metal matrix composites; friction stir welding; Al/SiCp composites; microstructure
