中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
Vol. 27 No. 4 April 2017 |
(1. Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China;
2. University of Chinese Academy of Sciences, Beijing 100039, China)
Abstract:The hot corrosion behaviour of a modified Ti3Al-based alloy under thin Na2SO4 deposit film was investigated at 910 and 950 °C in air. The corrosion product was identified by XRD and its morphologies on the surface and cross-section were observed by SEM. The alloy suffered from considerable hot corrosion attack. The mass gain versus time curves obtained by TGA exhibited two regions of different kinetics. The whole corroded layer consisted of loose and porous mixture oxides of TiO2, Nb2O5 and Al2O3. Numerous small nodules of corrosion product were observed. An illustrative schematic was established to describe the formation process of such nodules. It seemed that the refractory oxides played a significantly important role in determining the development of hot corrosion attack.
Key words: modified Ti3Al-based intermetallics; hot corrosion; corrosion product nodule; Na2SO4 melt