中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
Vol. 27 No. 2 February 2017 |
(1. Engineering Research Center of Continuous Extrusion, Ministry of Education, Dalian Jiaotong University, Dalian 116028, China;
2. Dalian Konform Technical Company Limited, Dalian 116050, China)
Abstract:The microstructure evolution of Al–Sr master alloy during continuous extrusion was investigated using X-ray diffractometer, scanning electron microscope and transmission electron microscope. Results indicate that the continuous extrusion process could change the Al4Sr particles of the alloy significantly in size and morphology. The as-cast needle-like Al4Sr particles are broken into small blocks in upsetting zone and crushed heavily in adhesion zone. Plenty of dislocations get tangled up in right-angle bending zone. Al4Sr particles grow in the extending zone. Finally, Al4Sr particles in products are approximately 28 μm in length. Al2Sr particles precipitate during the process. Compared with products by horizontal extrusion, Al4Sr particles by continuous extrusion are finer and distribute more evenly.
Key words: Al-Sr master alloy; grain refiner; continuous extrusion; microstructure evolution