中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 25 No. 12 December 2015 |
（1. Key Laboratory of Nanophotonic Functional Materials and Devices of Guangdong Province, Institute of Opto-Electronic Materials and Technology, South China Normal University, Guangzhou 510631, China;
2. Guangdong Food and Drug Vocational-Technical School, Guangzhou 510663, China;
3. School of Physics and Engineering, Henan University of Science and Technology, Luoyang 471023, China;
4. Guangdong Engineering Technology Research Center of Low Carbon and Advanced Energy Materials,
Guangzhou 510631, China）
Abstract:A porous coral-structured Si/C composite as an anode material was fabricated by coating Si nanoparticles with a carbon layer from polyvinyl alcohol (PVA), erosion of hydrofluoric (HF) acid, and secondary coating with pitch. Three samples with different pitch contents of 30%, 40% and 50% were synthesized. The composition and morphology of the composites were characterized by X-ray diffractometry (XRD) and scanning electron microscopy (SEM), respectively, and the properties were tested by electrochemical measurements. The results indicated that the composites showed obviously enhanced electrochemical performance compared with that without secondary carbon coating. The second discharge capacity of the composite was 773 mA·h/g at a current density of 100 mA/g, and still retained 669 mA·h/g after 60 cycles with a small capacity fade of less than 0.23%/cycle, while the content of secondary carbon source of pitch was set at 40%. Therefore, the cycle stability of the composite could be excellently improved by regulating carbon content of secondary coating.
Key words: Si/C composite; secondary coating; coral structure; anode material; Li-ion battery
