Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报(英文版)

Transactions of Nonferrous Metals Society of China

Vol. 25    No. 3    March 2015

[PDF Download]        

    

Response surface optimization of process parameters for removal of F and Cl from zinc oxide fume by microwave roasting
Zhi-qiang LI1,2,3,4,5, Jing LI1,2,3,4,5, Li-bo ZHANG1,2,3,4,5, Jin-hui PENG1,2,3,4,5, Shi-xing WANG1,2,3,4,5, Ai-yuan MA1,2,3,4,5, Bao-bao WANG1,2,3,4,5

1. Yunnan Provincial Key Laboratory of Intensification Metallurgy,
Kunming University of Science and Technology, Kunming 650093, China;
2. National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology,
Kunming University of Science and Technology, Kunming 650093, China;
3. Key Laboratory of Unconventional Metallurgy, Ministry of Education,
Kunming University of Science and Technology, Kunming 650093, China;
4. State International Joint Research Center of Advanced Preparation Technology of Superhard Materials,
Kunming University of Science and Technology, Kunming 650093, China;
5. Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology,
Kunming 650093, China

Abstract:Microwave was applied to roasting the zinc oxide fume obtained from fuming furnace for the removal of F and Cl. The effects of important parameters, such as roasting temperature, holding time and stirring speed, were investigated and the process conditions were optimized using response surface methodology (RSM). The results show that the effects of roasting temperature and holding time on the removal rate of F and Cl are the most significant, and the effect of stirring speed is the second. The defluorination rate reaches 92.6% while the dechlorination rate reaches 90.2%, under the process conditions of roasting temperature of 700 °C, holding time of 80 min and stirring speed of 120 r/min. The results indicate that the removal of F and Cl from fuming furnace production of zinc oxide fumes using microwave roasting process is feasible and reliable.

 

Key words: zinc oxide fume; F; Cl; removal rate; microwave roasting; response surface methodology

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com