中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 24 No. 7 July 2014 |
（1. Isuzu Advanced Engineering Center, Ltd., Kanagawa 252-0881, Japan;
2. State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China）
Abstract:MgAl2O4 particle-reinforced AC4C based alloy composites were fabricated by the stirring-casting method. The effects of the average sizes and the size distributions of MgAl2O4 particles on the dispersibility were investigated, and the microstructures, strength, and fatigue properties of MgAl2O4 particle-reinforced AC4C based alloy composites were evaluated. Tensile strength in the MgAl2O4 particle-reinforced AC4C based alloy composite was increased by using the classified particles. The fatigue limit at 107 cycles in the MgAl2O4 particle-reinforced AC4C-Cu composite increased by 27% compared to the unreinforced alloy at 250 °C. Dislocations were observed in the matrix around the MgAl2O4 particle which resulted from the mismatch of thermal expansion coefficients between MgAl2O4 and Al, and resisted failure and caused fatigue cracks to propagate around the MgAl2O4 particles, resulting in extensive crack deflection and crack bowing, which contributed to the improvement of fatigue strength.
Key words: MgAl2O4 particle; AC4C based aluminum alloy; classification of particles; composite; fatigue; tensile strength
