中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 24 No. 6 June 2014 |
（1. Metallurgy Department, Niroo Research Institute, Tehran 14686, Iran;
2. School of Metallurgy and Materials Engineering, Iran University of Science and Technology,
Tehran 16846-13114, Iran）
Abstract:Microstructural stability of IN939 superalloy with two different manufacturing routes was investigated during long-term aging at elevated temperatures by light optical microscope (OM) and scanning electron microscope (SEM) equipped with an EDS system. The results show that the coarsening behavior of g￠ particles is primarily impacted by the initial heat treatment conditions, and the effect of the prior manufacturing route (casting or hot forming) is found to be insignificant, if any, on the g￠ particles coarsening kinetics. In the temperature range of 790-827 °C, IN939 cast/wrought-HT2 alloys have more microstructural stability, while in the temperature range of 827-910 °C, the initial heat treatment marked as HT1 provides more stable microstructure for the cast or wrought IN939 superalloy.
Key words: nickel-based superalloy; IN939 superalloy; long-term coarsening; manufacturing route; heat treatment; g￠ particles; carbides
