Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第23卷    第z1期    总第1期    2013年12月

[PDF全文下载]        

    

文章编号:1004-0609(2013)S1-0067-04
初生α相含量对TC4钛合金性能的影响
李四清,刘晶南,王 旭

(北京航空材料研究院,北京 100095)

摘 要: 对两相锻TC4钛合金环形锻件进行4种制度热处理,以研究初生α相含量(体积分数)对合金力学性能的影响。采用光学显微镜和定量金相方法分析锻件的显微组织及其初生α相含量,测试锻件的拉伸、断裂韧度和低周疲劳等力学性能。结果表明,随着合金中初生α相含量的降低,其室温、400 ℃拉伸强度和400 ℃持久性能提高,但室温断裂韧度和低周疲劳性能降低。

 

关键字: TC4钛合金;初生α相;力学性能;热处理

Effect of primary α-phase volume fraction on mechanical properties of TC4 titanium alloy ring forging
LI Si-qing, LIU Jing-nan, WANG Xu

Beijing Institute of Aeronautical Materials, Beijing 100095, China

Abstract:The effects of primary α-phase volume fraction on mechanical properties of TC4 titanium alloy ring forging were investigated. Microstructures of the ring forging were observed using optical microscopy. The mechanical properties of the ring forging were evaluated. The results show that the tensile strength at room temperature and 400 ℃ and creep rupture life at 400 ℃ are improved with decreasing primary α-phase volume fraction, however, the facture toughness and strain control low cycle fatigue life at room temperature are decreased.

 

Key words: TC4 titanium alloy; primary α-phase; mechanical property; heat treatment

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com