Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第24卷    第1期    总第178期    2014年1月

[PDF全文下载]    [Flash在线阅读]    

    

文章编号:1004-0609(2014)01-0091-06
TA15钛合金的热变形微观组织与织构
李成铭,李 萍,赵 蒙,甘国强,薛克敏

(合肥工业大学 材料科学与工程学院,合肥 230009)

摘 要: 采用X 线衍射仪和EBSD分析研究近α型TA15钛合金在不同工艺参数下的热压缩变形组织和织构演变规律。结果表明:TA15合金热变形后淬火组织中存在针状马氏体α′相;晶粒在(101)和(002)滑移面上的滑移率先达到临界分切应力,发生塑性变形,使组织细化,并最终导致变形组织的择优取向;在小应变速率(0.01 s-1)和低变形温度(950 ℃)条件下,动态再结晶分数较高,产生较强的再结晶织构;随着变形温度和应变速率的升高,材料晶粒取向性减弱。

 

关键词: TA15钛合金;热变形;微观组织;织构

Microstructures and textures of TA15 titanium alloy after hot deformation
LI Cheng-ming, LI Ping, ZHAO Meng, GAN Guo-qiang, XUE Ke-min

School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China

Abstract:The microstructures and textures of TA15 titanium alloy after hot deformation under different process parameters were investigated by X-ray diffractometry (XRD) and electron back scattering diffractometry (EBSD). The results indicate that microstructures of TA15 alloy appear obvious acicular martensite α′ phase after hot deformation and quenching. The plastic deformation is going to occur in the slip systems of (101) and (002) slip planes by first reaching the critical resolved shear stress. The strong recrystallization textures are achieved at low deformation temperature and low strain rate, which will be weakened with increasing the strain rate and temperature.

 

Key words: TA15 titanium alloy; hot deformation; microstructure; texture

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com