中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 23 No. 11 November 2013 |
（1. College of Mechanical Engineering, Hunan Institute of Science and Technology, Yueyang 414006, China;
2. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China）
Abstract:Zr-Al-Ni-Cu bulk metallic glasses (BMGs) were developed and their fragility parameters (m) were calculated by Arrhenius and Vogel-Fulcher-Tammann (VFT) equations. The results show that the m values of the Zr-Al-Ni-Cu BMGs derived by Arrhenius equation are in agreement with the corresponding m values derived by VFT equation. These Zr-Al-Ni-Cu BMGs characterize in low m values. The low m values for these BMGs would be due to their network microstructures. In addition, the m values of Zr-Al-Cu-Ni BMGs could be obtained by regulating Zr content. The composition of Zr-Al-Cu-Ni BMGs with the lowest m value would be near 54%Zr (mole fraction) because the m value about 13 of Zr54Al13Cu18Ni15 BMG is the lowest among these Zr-Al-Ni-Cu BMGs developed.
Key words: Zr-Al-Ni-Cu alloy; metallic glass; fragility
