中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
Vol. 23 No. 9 September 2013 |
(Engineering Research Center of Ministry of Education on Laser Direct Manufacturing for Large Metallic Components, Beihang University, Beijing 100191, China)
Abstract:Low cycle fatigue (LCF) behavior of laser melting deposited (LMD) TC18 titanium alloy was studied at room temperature. Microstructure consisting of fine lamella-like primary α phase and transformed β matrix was obtained by double annealed treatment, and inhomogeneous grain boundary α phase was detected. Fatigue fracture surfaces and longitudinal sections of LCF specimens were examined by optical microscopy and scanning electron microscopy. Results indicate that more than one crack initiation site can be detected on the LCF fracture surface. The fracture morphology of the secondary crack initiation site is different from that of the primary crack initiation site. When the crack grows along the grain boundary α phase, continuous grain boundary α phase leads to a straight propagating manner while discontinuous grain boundary α phase gives rise to flexural propagating mode.
Key words: titanium alloy; low cycle fatigue; laser melting deposition