Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报(英文版)

Transactions of Nonferrous Metals Society of China

Vol. 23    No. 8    August 2013

[PDF Download]        

    

Influence of Al content on machinability of AZ series Mg alloys
Birol AKYUZ

Department of Mechanical and Manufacturing Engineering, Bilecik Seyh Edebali University, Bilecik 11200, Turkey

Abstract:Influence of Al content on the machinability of AZ series cast Mg alloys was investigated. In order to evaluate the machinability of the alloys, measurements of the cutting forces during turning operations and surface roughness were carried out as well as considering the microstructure and tensile properties. The results show that maximum tensile properties are observed with 2% (mass fraction) Al addition to Mg. As the Al content of the alloy increases above 2%, the cutting forces tend to reduce along with the ductility owing to the grain boundary precipitation of intermetallic phase (β-Mg17Al12). Cutting forces are able to increase as the cutting speed increases for all the alloys studied, and it’s attributed to flank built up at the tip of the cutting tool during machining.

 

Key words: machinability; cutting force; Mg; AZ series alloys

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com