(东北大学有色金属系冶金物化教研室,沈阳110006)
摘 要: 用化学镀法在活性铝粉表面包覆纯镍层制备Ni-Al复合粉末。结果表明,控制温度为86~89℃、 pH= 12.5~13.2 、硫酸镍加入量为35.0~45.0 g/ L、还原剂加入量为75~95 mL/ L时可获得镀覆质量良好的粉末,且镍呈结晶态析出。此外还讨论了这些工艺参数对镀覆质量的影响。
关键字: 化学镀 复合粉末 镀覆质量 工艺条件
BY ELECTROLESS NICKEL PLATING
(Department ofNonferrous Metallurgy,
Northeastern University, Shenyang110006)
Abstract:The composite powders were produced by electroless pure-nickel plating on the surface of activated aluminium powders. The experimental results showed that the well-qualified composite powders can be made by controlling technological parameters and nickel appears in crystal state. The influence of the technological parameters on the coating quality was also given.
Key words: electroless plating composite powders coating quality technological conditions