Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第8卷    第4期    总第29期    1998年12月

[PDF全文下载]        

    

文章编号:(1998)04-605-6
预制块制备对挤压铸造SiCw/ZM5复合材料性能的影响
郑明毅     吴   昆     张    巍     赵   敏    姚忠凯    赵连城

(哈尔滨工业大学材料科学与工程学院, 哈尔滨 150001)

摘 要:    制备了含不同粘结剂的SiC晶须预制块,并采用挤压铸造法制备出含不同粘结剂的SiCw/ZM5镁基复合材料,对其组织结构和力学性能进行了研究。结果表明,采用含酸性磷酸铝粘结剂制备的SiCw/ZM5镁基复合材料的性能最佳,这可能和粘结剂与晶须以及基体合金的界面反应有关。

 

关键字: 碳化硅晶须    镁合金    复合材料    预制块    粘结剂     制备工艺    性能

FABRICATION OF PREFORM AND ITS EFFECT ON PROPERTIES OF SiCw/ZM5 MAGNESIUM MATRIX COMPOSITES
Zheng Mingyi, Wu Kun, Zhang Wei, Zhao Min, Yao Zhongkai and Zhao Liancheng

School of Materials Science and Engineering,Harbin Institute of Technology, Harbin 150001, P. R. China

Abstract:Several kinds of SiC whisker preforms with different binders were prepared, SiCw/ZM5 magnesium matrix composites from different preforms were fabricated with squeeze casting method, the microstructure and mechanical properties of the composites were studied. The results show that the SiCw/ZM5 magnesium matrix composites with acid phosphate binder obtained the best mechanical properties, which may be due to the reaction between the binder and whisker and matrix alloy.

 

Key words: SiC whisker    magnesium alloy     composites    preform    binder     fabrication
                      properties

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com