Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第19卷    第5期    总第122期    2009年5月

[PDF全文下载]        

    

文章编号:1004-0609(2009)05-0800-08
各向异性对镁合金板材渐进成形的影响及微观组织演变
张青来1,肖富贵1,郭海玲1,高  霖2,A.B. Bondarev3,韩伟东4

(1. 江苏大学 材料科学与工程学院,镇江 212013;
2. 南京航空航天大学 机电工程学院,南京 210016;
3. Industrial Center, MATEKS Ltd, Moscow 121596,Russia;
4. 宝鸡市博信金属材料有限公司,宝鸡 721013
)

摘 要: 利用数控实验机床(CNC)、热拉伸实验机和金相显微镜,研究了AZ31B镁合金薄板在加热时渐进加工成形和显微组织变化规律。结果表明:镁合金薄板在加热条件下可以实现单点渐进成形,极限角随着温度的增加而增加,200 ℃时的成形极限角为60˚;各向异性对板料的渐进成形影响较大,且250 ℃时合金各向异性最小;渐进成形包括加工硬化、静态再结晶和动态再结晶的复杂过程;板材的微观组织由粗大和细小晶粒组成,这取决于板料的成形温度和成形时间;板料质量是影响镁合金渐进成形质量的主要因素之一。

 

关键字: 镁合金;渐进成形;加热;各向异性

Effect of anisotropy on incremental forming of magnesium alloy sheet and its microstructure evolution
ZHANG Qing-lai1, XIAO Fu-gui1, GUO Hai-ling1, GAO Lin2, A.B. Bondarev3, HAN Wei-dong4

1. School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China;
2. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
3. Industrial Center, MATEKS Ltd, Moscow 121596, Russia;
4. Baoji Boxin Metal Materials Ltd, Baoji 721013, China

Abstract: The formability and microstructure evolution rules of AZ31B magnesium alloy thin sheet in the incremental forming at elevated temperature were investigated on CNC machine by hot tensile test machine and metallographic microscopy. The results show that, at elevated temperatures, the AZ31B magnesium alloy thin sheet can be formed by single-point incremental forming, the forming limit angle increases with increasing temperature, reaches 60˚ at 200 ℃. Anisotropy has a great impact on the sheet metal incremental forming and it reaches the minimum value at 250 ℃. Incremental forming is a complex process including work-hardening, static recrystallization and dynamic recrystallization. The microstructures of the sheet are composed of coarse and fine grains, which depend on the sheet metal forming temperature and time. The quality of magnesium alloy sheet is one of the main factors that affect the quality of the incremental forming.

 

Key words: magnesium alloy; incremental forming; heating; anisotropy

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com