Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第14卷    第2期    总第59期    2004年2月

[PDF全文下载]        

    

文章编号:1004-0609(2004)02-0204-06
固气两相流雾化工艺规律
陈振华, 陈  刚, 严红革

(湖南大学 材料科学与工程学院, 长沙 410082)

摘 要: 采用高压氮气为气相雾化介质,分别以NaCl颗粒和Fe粉为固相雾化介质, 对Al-Si合金、 金属Zn进行固气两相流雾化实验, 系统研究了工艺参数对粉末平均粒度和形貌的影响规律。结果表明, 固气两相流雾化存在最佳的固/气流率比,采用的固体介质颗粒只有既达到较高的浓度又具有较高速度, 才能极大地提高雾化效果。 同时, 较高密度的固体介质、 低金属液流量有利于获得平均粒度细小、 形貌复杂、粒度分布更集中的金属粉末。

 

关键字: Al-Si合金; 锌; 雾化; 粉末; 介质

Process regularities of solid-gas dual media atomization
CHEN Zhen-hua, CHEN Gang, YAN Hong-ge

College of Materials Science and Engineering, 
Hunan University, Changsha 410082, China

Abstract: Al-Si alloy and metal zinc were selected as the samples to study the effects of atomization parameters on mean particle size, particle size distribution and particle morphology of the as-atomized powder with N2 employed as the gas atomization medium and NaCl, Fe particle as solid atomization medium respectively. The results show that the metal powder with finer mean particle size and narrow particle size distribution can be produced under the conditions of proper mass flow rate of solid to gas in atomization medium, higher density of solid medium and lower metal mass flow rate.

 

Key words: Al-Si alloy; Zinc; atomization; powder; medium

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com