中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
Vol. 22 No. 4 April 2012 |
(1. School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China;
2. School of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics,
Nanjing 210016, China)
Abstract:The dynamic recrystallization (DRX) behavior of Ti−6Al−2Zr−1Mo−1V alloy was investigated at deformation temperature of 1000−1100 °C and strain rate of 10−3−1.0 s−1 by using compression test. The results show that discontinuous dynamic recrystallization (DDRX) is the predominant recrystallization mechanism at temperature higher than 1050 °C and strain rate lower than 0.01 s−1. Meanwhile, continuous dynamic recrystallization is the main mechanism observed at temperature below 1050 °C and strain rate above 0.01 s−1, mixed with a few DDRX grains. In addition, decreasing strain rate and increasing deformation temperature are found to facilitate the progress of DRX and refinement of grains in the Ti alloy in β forging process.
Key words: dynamic recrystallization; Ti−6Al−2Zr−1Mo−1V alloy; b forging process; compression test