中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 22 No. 1 January 2012 |
mechanical properties of 5Ni/(10NiO−NiFe2O4)
（School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China）
Abstract:5Ni/(10NiO−NiFe2O4) cermet materials were prepared by cold pressing sintering method in different atmospheres. The phase compositions were studied by XRD, microstructure was studied by SEM and mechanical properties were studied by three-point-bending strength and heat cycle. The results show that Ni/(NiO−NiFe2O4) cermet can be obtained by sintering in vacuum or atmospheres with oxygen content of 2×10−5, 2×10−4 and 2×10−3, respectively, but the phase composition of the ceramics varies greatly with oxygen content of the sintering atmosphere. The cermet tends to have a high content of NiO when sintered in vacuum. The content of NiFe2O4 and Ni in the cermet materials respectively increases and decreases with increasing oxygen in the sintering atmosphere. In the vacuum, cermet has an average grain size of 3.90 μm and bending strength of 138.59 MPa, which is able to withstand thermal shock tests 6.67 times in average.
Key words: nickel ferrite; cermet; mechanical property; sintering atmosphere
