中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 No. 11 November 2011 |
lithium ion-conductive electrolyte Li1.3Al0.3Ti1.7(PO4)3
（1. Key Laboratory of Hunan Forest Products and Chemical Industry Engineering, Zhangjiajie 427000, China;
2. College of Chemistry and Chemical Engineering, Jishou University, Jishou 416000, China）
Abstract:The sintered Li1.3Al0.3Ti1.7(PO4)3 pellets with different mole fractions of Li3PO4 were prepared by sol−gel method. The structure, surface morphology, electrochemical window, ionic conductivity and activation energy of the sintered pellets were studied by X-ray diffraction, scan electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The results show that all the sintered Li1.3Al0.3Ti1.7(PO4)3 pellets with different mole fractions of Li3PO4 have similar X-ray diffraction patterns. The sintered Li1.3Al0.3Ti1.7(PO4)3 pellet with Li3PO4 shows a lower porosity and is denser than the one without Li3PO4. The addition of Li3PO4 has a large effect on the porosity and density of the sintered Li1.3Al0.3Ti1.7(PO3)4 pellet, and little effect on its electrochemical window. Among the sintered Li1.3Al0.3Ti1.7(PO3)4 pellets with different mole fractions of Li3PO4, the one with 1% Li3PO4 shows the activation energy of 0.314 2 eV and the highest ionic conductivity of 6.15´10−4 S/cm.
Key words: sol−gel; electrolyte; ionic conduction
