中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
Vol. 21 No. 8 August 2011 |
cold rolling and annealing of titanium and aluminum foils
(Key Laboratory of Aerospace Advanced Materials and Performance of Ministry of Education,
School of Materials Science and Engineering, Beihang University, Beijing 100191, China)
Abstract:Multilayered Ti-Al based intermetallic sheets were fabricated by sintering alternately layered titanium and aluminum foils. The microstructure and phase formation of the obtained sheets under different sintering conditions were evaluated by various techniques. The results reveal that when the sintering temperature is above the melting point of aluminum, the self-propagating high-temperature synthesis reaction occurs between Ti and Al, and forms various phases of Ti-based solid solutions including α-Ti Ti3Al, TiAl, TiAl2 and α-Ti including TiAl3, etc. When the sintering time increased, Ti-based solid solution, TiAl2 and TiAl3 disappeared gradually, and the sheet containing Ti3Al and TiAl phases in a multilayered structure formed finally. A lot of voids were also observed in the sintered structures, which were caused by the melting Al, Kirkendall effect and the difference of molar volumes between reactants and products. The voids were eliminated and a dense sample was obtained by the following hot press.
Key words: multilayered composites; Ti-Al based intermetallics; self-propagating high-temperature synthesis; voids; cold rolling; annealing