中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 No. 7 July 2011 |
（1. Unité de recherche de Chimie Industrielle et Matériaux (URCIM), ENIS. B.P.W. Sfax, Tunisie;
2. IUT Mesures Physiques d’Orsay- Université Paris XI, Plateau du Moulon, 91400 ORSAY, France）
Abstract:Chemically resistant anodic oxide layers were formed on pure aluminum substrates in oxalic acid-sulphuric acid bath. Acid dissolution tests of the obtained anodic layers were achieved in accordance with the ASTM B 680-80 specifications: 35 mL/L 85% H3PO4+20 g/L CrO3 at 38 °C. Influence of oxalic acid concentration, bath temperature and anodic current density on dissolution rate and coating ratio was examined, when the sulphuric acid concentration was maintained at 160 g/L. It was found that chemically resistant and compact oxide layers were produced under low operational temperature (5 °C) and high current densities (3 A/dm2). A beneficial effect was observed concerning the addition of oxalic acid (18 g/L). The morphology and the composition of the anodic oxide layer were examined by scanning electron microscopy (SEM), atomic force microscopy (AFM) and glow-discharge optical emission spectroscopy (GDOES).
Key words: aluminum; anodic oxide layer; oxalic acid−sulphuric anodization; dissolution rate; coating ratio
