中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 No. 5 May 2011 |
friction stir welded AZ61A magnesium alloy
（1. Department of Mechanical Engineering, National Engineering College,
K.R. Nagar−628502, Kovilpatti, Tamil Nadu, India;
2. Centre for Manufacturing Sciences, Department of Mechanical Engineering,
National Engineering College, K.R Nagar−628502, Kovilpatti, Tamil Nadu, India;
3. Department of Manufacturing Engineering, Annamalai University, Annamalainagar−608002,
Chidambaram, Tamil Nadu, India）
Abstract:The influences of axial force on tensile properties of friction stir welded AZ61A magnesium alloy were studied. Five different values of axial forces ranging from 3 to 7 kN were used to fabricate the joints. Tensile properties of the joints were evaluated and correlated with the stir zone microstructure and hardness. From this investigation, it is found that the joint fabricated with an axial force of 5 kN exhibits superior tensile properties compared to other joints. The formation of finer grains in the stir zone and higher hardness of the stir zone are the main reasons for the superior tensile properties of these joints.
Key words: AZ61A magnesium alloy; friction stir welding; tensile properties; microhardness; microstructure
