中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 9 No. 3 September 1999 |
（1. State Key Laboratory of Advanced Technologyfor Materials Synthesis and Processing,Wuhan University of Technology, Wuhan 430070, P.R. China;
2. Welding Division, Beijing Institute of Aeronautical Materials, Beijing100095, P.R.China）
Abstract:Molybdenum alloys and titanium alloys were sintered at 1473K for 1h under a pressure of 30MPa. It was found that the addition of Al can increase evidently the relative density of sintered Mo-Fe alloys. The Fe-Al additives are also suitable for the sintering of titanium alloys, and the Mo alloy and Ti alloy can be densified concurrently with the same additives 3%Fe-1.5%Al. The experimental results also showed that during the sintering of Mo-Ti alloys the Fe-Al sintering aids promoted the formation of Mo-Ti solid solution, but the solid solution reaction occurred at the low sintering temperature of 1473K is inadequate. Finally, Mo-Ti system functionally graded material has been successfully fabricated. Its density changed gradually from 9.52 g/cm3 to 4.48 g/cm3 in thickness direction. Such a material can be used in dynamic high-pressure technology.
Key words: molybdenum-titanium; functional gradient alloys; sintering
