Effects of microwave pretreatment on zinc extraction fromspent catalyst saturated with zinc acetate|ZHANG Ze-biao(张泽彪), ZHANG Zheng-yong(张正勇), NIU Hao(牛浩), PENG Jin-hui(彭金辉),ZHANG Li-bo(张利波), QU Wen-wen-《中国有色金属学报》官方网站|全网首发|论文开放获取

您目前所在的位置：首页 - 期刊简介 - 详细页面

中国有色金属学报(英文版)

Transactions of Nonferrous Metals Society of China

Vol. 20 Special 1 May 2010

Effects of microwave pretreatment on zinc extraction from spent catalyst saturated with zinc acetate

ZHANG Ze-biao(张泽彪)^{1, 2}, ZHANG Zheng-yong(张正勇)^{1, 2}, NIU Hao(牛浩)^{1, 2}, PENG Jin-hui(彭金辉)^{1, 2},
ZHANG Li-bo(张利波)^{1, 2}, QU Wen-wen

（1. Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology,
Kunming 650093, China;
2. Key Laboratory of Unconventional Metallurgy, Ministry of Education,
Kunming University of Science and Technology, Kunming 650093, China）

Abstract:A new technology for microwave pretreatment of spent catalyst on Zn extraction by HCl leaching was proposed and the temperature-change curve of spent catalyst under microwave irradiation was measured. The influence of microwave pretreatment temperature and microwave irradiation time on zinc extraction was investigated and the mechanism of microwave pretreatment for spent catalyst was analyzed. The results show that microwave pretreatment can greatly enhance the leaching rate of Zn. The Zn extraction reaches 96.58% under the conditions of microwave pretreatment temperature of 950 ℃ and the microwave irradiation time of 12 min. The blocked pores of spent catalyst can be opened through microwave pretreatment, increasing the contact area of leaching reagent and zinc.

Key words: microwave pretreatment; spent catalyst; leaching rate; zinc

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW