中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
Vol. 12 No. 4 August 2002 |
process of TiAl base alloy(Ⅱ)——Mechanical behavior
(State Key Laboratory for Powder Metallurgy,
Central South University, Changsha 410083, China)
Abstract:By using thermal simulation technique and computer simulation, the conventional canned-forging process of TiAl base alloy was studied. The effect of can parameters on the mechanical behavior of TiAl alloys with different H/D ratios was analyzed in this process. The results show that, the pea k stress of TiAl base alloy without canning is far higher than that with canning. Compared with the samples with the same H/D ratio, the peak stress decreases with increasing can thickness; while compared with the samples with the same can thickness, the peak stress decreases with increasing H/D ratio. The decrease of t he true stress of TiAl base alloy with canning were analyzed according to the theory of plastic deformation and results of computer simulation.
Key words: TiAl base alloy; thermal mechanical treatment ; mechanical behavior; computer simulation