中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 11 No. 5 October 2001 |
matrix composite at laser welding
（1. Department of Materials Engineering, Dalian University of Technology,
Dalian 116024, P.R.China;
2. National Key Laboratory of Laser Technology, Huazhong University of
Science and Technology, Wuhan 430074， P.R.China；
3. National Key Laboratory of Advanced Welding Production Technology,
Harbin Institute of Technology, Harbin 150001, P.R.China）
Abstract: Interface reaction of SiCw/6061Al aluminium matrix composite subjected to laser welding was studied. It is pointed out that the main reason for bad weldability of the material is concerned with the interface reaction during the welding. Effects of welding parameters on interface reaction were also investigated. The results show that the interface bonding state can be improved by laser beam, and the main welding parameter affecting the strength of weld is laser output power. The smaller the output power, the lower the extent of interface reaction and the better the mechanical properties.
Key words: aluminium matrix composite; laser welding; interface reaction
