中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 11 No. 2 April 2001 |
Production of high strength Al-Zn-Mg-Cu alloys
by spray forming process
by spray forming process
（General Research Institute for Nonferrous Metals, Beijing 100088, P.R.China）
Abstract:High strength Al-Zn-Mg-Cu alloys were produced by spray forming process, and compacted by hot extrusion. The results show that the as-deposited billets have fine-grained microstructure and low porosity. After heat treatment, mechanical properties increase greatly: tensile strength up to 754 MPa, yield strength up to 722 MPa, fracture elongation up to 8%, and elastic modulus up to 72 GPa, respectively.
Key words: spray forming; Al-Zn alloy; hot extrusion; mechanical properties
