中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 14 No. 2 April 2004 |
（1. Department of Materials Engineering, Kunming University of Science and Technology,
Kunming 650093, China;
2. Materials Science Department, University of Southern California,
Los Angeles, CA 90089-0241, USA）
Abstract:The density, cell size and structure of closed-cell aluminum foam were measured by optical microscopy and image analysis. The properties and the mechanism of compressive deformation that occur in closed-cell aluminum foam were measured and discussed. The results show that the cell size of foam with density of 0.37 mg/m3is distributed in the range of 0.5 4.0 mm. The cell size of foam with density of 0.33 mg/m3is distributed in the range of 0.5 5.0 mm.
The cell wall thickness of both types is 0.1-0.3 mm. The closed-cell aluminum foam almost belongs to isotropic one, with a variation of±15% in elastic modulus and yield strength in longitudinal and transverse direction. Under compressive loading, foam materials show inhomogeneous macroscopic deformation. The site of the onset of local plastic deforma-
tion depends on the cell structure. The shape of cell is more important than size in determining the yielding susceptibility of the cells. At early stage of deformation,the deformation is localized in narrow bands having width of one cell s diameter, and outside the bands the cell still remains the original shape. The cells within bands experience large permanent deformation. The band normals are usually within 20°of the loading axis.
Key words: aluminum foam; cell structure; mechanical properties
