中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 14 No. 1 February 2004 |
（1. Department of Mechanical Engineering, Beijing Jiaotong University, Beijing 100044, China;
2. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;
3. Metal Forming Department, Northeastern University, Shenyang 110004, China;
4. Anshan Automobile Fittings Factory, Anshan 114014, China）
Abstract:QTi3.5-10graphite(mass fraction, %) slurry was prepared using electromagnetic-mechanical stirring technology. The distribution of graphite particles in QTi3.5-10graphite slurry was studied using cold quenching method. The results show that solid fraction of QTi3.5-10graphite slurry increases with the decreasing stirring temperature. There is a linear relationship between solid fraction and stirring temperature. With increasing solid fraction, the rising of graphite particles in slurry is restricted gradually. When the solid fraction is larger than 42.5%, the rising of graphite particles in slurry can be controlled, and QTi3.5-10graphite slurry with uniform distribution of graphite particles can be prepared.
Key words: QTi3.5; electromagnetic-mechanical stirring; graphite particles; solid fraction
