中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 35 No. 5 May 2025 |
（1. Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China;
2. Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan 430070, China;
3. School of Automotive Engineering, Wuhan University of Technology, Wuhan 430070, China）
Abstract:In order to reveal the cavitation erosion mechanisms of Fe50Mn30Co10Cr10 coating prepared by laser melting deposition (LMD) technique, the phase composition evolution, microstructure, microhardness, cavitation erosion resistance and failure mechanisms were investigated. The results demonstrate that the amount of martensite HCP ε phase of the coating surface increased by a factor of 2.43, and the microhardness increased from HV 270 to HV 410 after 20 h of cavitation erosion test in distilled water. The cumulative volume loss of the coating was approximately 55% less than that of AlCoCrxCuFe (x=2.0), and the cumulative mean depth of erosion (MDE) was 9% that of FeCoCrAlNiTix (x=2.0). The surface strength and plasticity of the coating were further strengthened in the process of cavitation erosion due to the back stress strengthening and work hardening mechanism caused by the heterogeneous structure, which effectively improved the cavitation erosion resistance of the coating.
Key words: cavitation erosion; Fe50Mn30Co10Cr10 high entropy alloy; transformation induced plasticity; laser melting deposition; failure mechanisms
