中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 35 No. 5 May 2025 |
（1. School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China;
2. State Key Laboratory of Porous Metal Materials, Northwest Institute for Nonferrous Metal Research, Xi’an 710016, China;
3. Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, VIC 3000, Australia;
4. Advanced Materials Additive Manufacturing Research & Innovation Centre, Hangzhou City University, Hangzhou 310015, China）
Abstract:Ti-1Al-8V-5Fe (Ti-185) alloy with different iron contents was additively manufactured by electron beam powder bed fusion (EB-PBF), and its microstructure and mechanical properties were investigated. The results show that increasing the Fe powder content from 4.56 wt.% to 5.98 wt.% (within the specification range) converted coarse columnar prior-β grains in as-printed alloy into fine equiaxed ones ((54.2±32.4) μm) by EB-PBF. However, due to subsequent in-situ precipitation, a micron-thick low-solute weak α-phase became prevalent along each equiaxed grain boundary (GB). This drastically decreased the tensile deformation energy of Ti-185 from 6.2′107 J/m3 (columnar grains) to 4.8′107 J/m3 (equiaxed grains), despite a mild increase in strength. Fracture characteristics unveiled that the weak GB α-phase is the main crack initiation site and propagation path.
Key words: Ti-1Al-8V-5Fe alloy; equiaxed grain; deformation energy; grain boundary α; phase precipitation
