中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 35 No. 2 February 2025 |
（1. School of Materials Science and Engineering, Central South University, Changsha 410083, China;
2. National Key Laboratory of Science and Technology on High-strength Structural Materials, Central South University, Changsha 410083, China;
3. Key Laboratory of Non-ferrous Metals Materials Science and Engineering, Ministry of Education, Central South University, Changsha 410083, China;
4. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China）
Abstract:The effects of tungsten inert gas arc-assisted friction stir welding (TIG-FSW) on the microstructure, tensile properties and corrosion resistance of AA6016 and AA2519 alloys lap joints were investigated by means of optical microscope, scanning electron microscope, tensile test at room temperature, corrosion immersion tests and electrochemical measurements. The results show that the introduction of TIG arc during FSW process results in a more uniform microstructure of the joint with no tunnel hole defects. Furthermore, it enhances tensile strength and elongation of the joint with increased rates of 11.5% and 50.0%, respectively; meanwhile, the corrosion current density and largest corrosion depth are decreased with reduction rates of 78.2% and 45.7%, respectively. TIG-FSW can promote flow, contact and diffusion of materials, thus improving microstructure of the joint. Additionally, it reduces the size and number of secondary phase particles. Consequently, these factors contribute to the higher tensile properties and corrosion resistance of the joints.
Key words: friction stir welding; lap joint; dissimilar aluminum alloys; secondary phase particles; microstructure; tensile properties; corrosion resistance
