中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 34 No. 12 December 2024 |
（1. School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China;
2. Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Ministry of Education, Dalian University of Technology, Dalian 116024, China;
3. School of Materials Science and Engineering, Anhui Polytechnic University, Wuhu 241000, China;
4. State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China）
Abstract:The segregation of Sn and discontinuous precipitation at grain boundaries are detrimental to the strength, ductility, and machinability of the Cu-Ni-Sn alloy. A strategy to solve the above problems is multi-component composition design by introducing strong enthalpic interaction element. In this work, a series of Cu80Ni15Sn5-xTix (at.%) alloys were designed by cluster-plus-glue-atom model, and the effects of Ti content on the microstructure and properties of the alloys were systematically investigated using TEM and other analysis methods. The results demonstrate that Ti can effectively inhibit the segregation and discontinuous precipitation while promoting continuous precipitation to improve the high-temperature stability of the alloys. As the Ti content increases, the distribution of Ti changes from uniform distribution to predominant precipitation. The hardness and conductivity of the alloy exceed those of the C72900 (Cu-15Ni-8Sn (wt.%)) commercial alloy and the Cu80Ni15Sn5 (at.%) reference alloy when Ti is in the solution state.
Key words: Cu-Ni-Sn alloy; microstructure; properties; cluster-plus-glue-atom model; segregation; discontinuous precipitation; enthalpic interaction
